1. DL manuals
  2. Valor
  3. Indoor Fireplace
  4. 719
  5. Owner's Manual

Valor 719 Owner's Manual

Other manuals for 719: Installer's Manual
Manual is about: INSET LIVE FUEL EFFECT GAS FIRE

Summary of 719

  • Page 1

    5109946/02 owner guide this guide is intended to help you care for your gas fire. Please read thoroughly before using and keep for future reference this guide to be left with the owner © valor heating this appliance is for use with natural gas (g20) when converted using conversion kit no. 0595221 th...

  • Page 2

    Safety first. Valor fires are ce approved and designed to meet the appropriate british standards and safety marks. Quality and excellence. At the heart of every valor fire. All valor fires are manufactured to the highest standards of quality and excellence and are manufactured under a bs en iso 9001...

  • Page 3: List of Contents

    List of contents section page safety 4 appliance dimensions 6 gas consumption 6 operating your fire 7 cleaning 9 metal parts 9 burner 9 ceramic fuel effect and rear wall 9 fuel bed refitting 10 maintenance 12 useful telephone numbers 13 this gas fire is designed to meet the most stringent quality, p...

  • Page 4: Safety

    Safety do have the fire installed by a competent person. In the united kingdom, installation must be in accordance with the latest edition of the gas safety (installation & use) regulations. In the republic of ireland, installation must be in accordance with all national and local regulations in for...

  • Page 5

    Do always use a fireguard complying with bs 8423 for the protection of young children, the elderly or infirm. Do wait three minutes before attempting to relight if the fire is switched off or the flames are extinguished for any reason.(your fire is fitted with a safety device that will automatically...

  • Page 6: Appliance Dimensions

    Appliance dimensions gas consumption model 719 has a maximum natural gas input of 6.0kw (gross) has a maximum natural gas output of 3.5kw has a minimum natural gas input of 2.7kw (gross) has a minimum natural gas output of 1.3kw model 719 when converted using kit number 0595221 has a maximum propane...

  • Page 7: Operating Your Fire

    Operating your fire the oxysafe flame sensing & flue blockage safety system. For your safety, this appliance is fitted with a flue blockage safety device which will shut down the appliance in the event of abnormal flue conditions. This device is not a substitute for an independently mounted carbon m...

  • Page 8

    Explained above. 3. If low heat is required, release the button. The button will automatically spring up to the low heat position shown in figure 2 (see note i). 4. For a higher heat level slide the button upwards. The burner flames and heat output will gradually increase until the button reaches th...

  • Page 9: Cleaning

    Cleaning to maintain the high performance and quality finish of your appliance, please follow these guidelines: ! Before attempting to clean the fire, please remember to turn off the fire and wait for the appliance to cool. The fire will retain heat for some time before cleaning can begin. ! If any ...

  • Page 10: Fuel Bed Refitting

    Fuel bed refitting 1. Place the rear base coal in the firebox. It should rest on the ledges at the rear sides of the burner unit. When located gently move the rear base coal so that it is as far forward as possible. The amount of movement will be negligible (see figure 4). 2. Place the front base co...

  • Page 11

    4. Place a type “b” coal between the front and rear base coals as shown in figure 7. The letter “b” should be upright. 5. Place a type “a” coal between the front and rear base coals with the letter “a” upright. The top of the coal should rest against the centre coal of the rear base coal as shown in...

  • Page 12: Maintenance

    Maintenance regular maintenance in order to achieve and maintain high levels of personal safety and performance efficiency, it is essential that the opening at the back of the fire and the flue are kept clear of any form of obstruction. It is possible that deposits of mortar or soot could fall and a...

  • Page 13: Useful Telephone Numbers

    Useful telephone numbers general advice about gas and your gas fire: valor technical helpline 08706 061 065. To report faults or arrange for your fire to be serviced: valor service 08706 090 081. For sales or product information: valor sales 08706 061 067. For spares inquiries spare parts are availa...