Valor Multimedia DD-806W Plus Owner's Manual - page 18
32
33
CARD Operation
Accessing CARD Source
1. To switch to
CARD source, press the Menu button on the front panel and press the CARD
icon or press the (
SRC) button on the remote control until the CARD appears at the top of the
screen.
NOTE: Make sure the SD card is inserted properly into the unit.
2. Select the Main menu, and then touch the
CARD icon to select CARD as your source.
CARD Instructions
The touch keys on the screen for
CARD playback are described below:
: Press to Play/Pause
: Press to play previous track
: Press to play next track
: Press to return to the root folder menu
: Press to enter EQ setup
: Press to activate/deactivate Repeat Single/ Repeat Folder/Repeat All
: Press to activate/deactivate Shuffle Mode
: Press to display the numeric keypad on the screen and then you can use the numeric
keypad to access a track directly
Note: For other definitions, please go to CD/MP3/WMA/JPEG Operation as references.
FLASH DRIVE Operation
Accessing the Flash Source
1. To switch to
FLASH source, press the Menu button on the front panel and press the Flash
Drive icon or press the (
SRC) button on the remote control until the FLASH appears at the top of
the screen.
NOTE: Make sure the USB cable is connected with a flash drive device.
2. Select the Main menu, and then touch the
FLASH DRIVE icon to select FLASH as your
source.
Flash Drive Instructions
The touch keys on the screen for
FLASH playback are described below:
: Press to Play/Pause
: Press to play previous track
: Press to play next track
: Press to return to the root folder menu
: Press to enter EQ setup
: Press to activate/deactivate Repeat Single/ Repeat Folder/Repeat All
: Press to activate/deactivate Shuffle Mode
: Press to display the numeric keypad on the screen and then you can use the numeric
keypad to access a track directly
Note: For other definitions, please go to CD/MP3/WMA/JPEG Operation as references.