Value Hobby Neptune Seaplane25 Instruction Manual - page 6
www.valuehobby.com/neptune25.html
Part Lists:
Fuselage x 1
Wing panel x 2
Aileron x 2
Horizontal stabilizer x 1
Elevator x 1
Fin x 1
Rudder x 1
Cowling x 1
M3*12mm (0.5-inch) round head self-tapping screw x 6 for mounting cowling
Motor mount x 1
M3*12mm (0.5-inch) screw x 1 for mounting motor mount
M3*20mm (0.8-inch) screw x 4 for mounting motor
M3 washer x 4 for mounting motor
M3 nut x 4 for mounting motor
Battery hatch x 1
M3*12mm (0.5-inch) screw x 2 for mounting battery hatch
Tie cable 300mm (11.8-inch) x 2 for binding battery
Rear hatch x 1
M3*12mm (0.5-inch) screw x 4 for mounting battery hatch
Tail skid x 1
Wing joiner x 1
M3*40mm (1.6-inch) wing bolt x 2 for mounting wing
M3 washer x 2
Wing bolt plate x 1
Float x 2
Aileron pushrod wire Φ1.8x145mm (5.7-inch) x 2
Rudder pushrod wire Φ1.8x655mm (25.8-inch) x 1
Elevator pushrod wire Φ1.8x750mm (29.5-inch) x 1
Elevator pushrod wire Φ1.8x50mm (2.0-inch) x 1
Pushrod connector x
5 Control horn x 4
Back plate x 4
Clevis x 4
M2*16mm (0.6-inch) screw x 4 for mounting rudder and elevator control
horn M2*20mm (0.8-inch) screw x 4 for mounting aileron control horn
M2*10mm (0.4-inch) clevis bolt x 4
Hinge x 20
6