Wireless alarm system ws-360. With mini cellular module quick installation guide.
Alarm system overview front side: back side:.
Basic steps to setup your alarm system please follow the following 4 steps in order to complete the installation of your alarm system ws-360. Step 1: how to setup time? Please follow the next steps: 1. Press: “ent”. 2. Enter code: “888888” (this is the default password). 3. Select: “set time” use th...
Step 2: how to setup the phone numbers? In case the alarm gets triggered, the system can send to up to 5 phone numbers an alarm notification by sending a sms or giving a call. Note: do not forget to insert a sim card in the port located on the backside of the panel. The sim card does need internet/d...
11. You will see: “2: personal nbr”, please enter a second phone number (for example a member of your family or your office). 12. Press: “ent”. 13. Use the arrows to select notification mode: “call by phone” or “sms reporting”. 14. Press: “ent”. 15. You will see: “3: personal nbr”, please enter a...
Step 3: how to arm or disarm the alarm system? “arm away” mode：once any sensor in perimeter zone or motion zone get triggered; the alarm system goes off. “arm home” mode：once any sensor in perimeter zone triggered; the alarm system goes off. Sensors in the motion zone will not be able to trigger the...
2. Once you press “lock button” the alarm panel will start to sound “bi bi bi” for 15 seconds before the arm mode is activated. 3. Done! Please follow the next steps to disarm the system from the remote control: 1. Press: the “unlock button” (is the first button from top to bottom). 2. Done! 3. By s...
Step 4: where to install each sensor? 1. Remote control: how to install: the remote control is ready to use, you need to do nothing. Just use it the same way to lock or unlock your car or like a portable panic button. 2. Panic button: how to install: activate the panic button from the back side of i...
4. Motion detector (p.I.R): how to install: we recommend you to install the motion detectors on the top of any corner of the rooms you want to protect. Just turn on the device and stick it to the wall with a screwdriver. 5. Outdoor siren: how to install: activate the built-in rechargeable backup bat...
