Van Medevoort CA350 Instruction Manual - page 7
vM CA350 STEREO CONTROL AMPLIFIER
Controls
Precautions
Connections
Maintenance and advice
Technical
Specifications
• On the backside of the amplifier you will find 2 rows of RCA-cinch inputs. The upper row is for the
LEFT channel and the bottom row is for the RIGHT channel.
• For your convenience you will find a red sticker, indicating “phase”. The phase of your electricity
system can be determined with a voltage seeker.
• The amplifier must only be cleaned with a cloth, impregnated with a Ph-neutral cleaning fluid. And
it must be mildly moist! NEVER use strong fluids and/or erasers. Before cleaning ALWAYS
remove the power cord from its wall socket, by its plug not by its cord.
• The optimum operating temperature (35° - 45° C) is reached after approx. 60 minutes of
continuous play. Then it will be possible to start enjoying the superb van Medevoort audio qualities
of this class ‘A’ pre amplifier.
• We strongly recommend that you use a high quality Interconnect cable. E.g. the renowned van
Medevoort Silver Cable.
6