VanAccess GW0221 User Manual - 5.3 Call Features
GW0221 User Manual
8/24
Users can send and receive calls from PSTN. To receive PSTN calls, simply pick up the phone
receiver (or use hands free) when the analog phone rings. To make a PSTN call, first press *00 (*00
is default. You can change the “PSTN Access Code” via the web configuration screen) to get the
PSTN line dial tone and then dial the PSTN number you want to call.
5.3 CALL FEATURES
5.3.1 Call Features Table
Following table shows the call features of GW0221.
Key
Call Features
*30
Block Caller ID (for all subsequent calls)
*31
Send Caller ID (for all subsequent calls)
*67
Block Caller ID (per call)
*82
Send Caller ID (per call)
*50
Disable Call Waiting (for all subsequent calls)
*51
Enable Call Waiting (for all subsequent calls)
*70
Disable Call Waiting. (Per Call)
*71
Enable Call Waiting (Per Call)
*72
Unconditional Call Forward.
To use this feature, dial “*72” and get the dial tone. Then dial the forward number
and “#” for a dial tone, and then hang up.
*73
Cancel Unconditional Call Forward.
To cancel “Unconditional Call Forward”, dial “*73” and get the dial tone, then hang
up.
*90
Busy Call Forward.
To use this feature, dial “*90” and get the dial tone. Then dial the forward number
and “#” for a dial tone, and then hang up.
*91
Cancel Busy Call Forward.
To cancel “Busy Call Forward”, dial “*91” and get the dial tone, then hang up.
*92
Delayed Call Forward.
To use this feature, dial “*92” and get the dial tone. Dial the forward number and
“#” for a dial tone and then hang up.
*93
Cancel Delayed Call Forward.
To cancel this feature, dial “*93”, get the dial tone, and then hang up.
Flash/Hook
When in conversation, this action will switch to the new incoming call if there is a call
waiting indication. When in conversation without an incoming call, this action will
switch to a new channel to make a new call.
5.3.2 PSTN Pass Through
When GW0221 is out of power or loses registration or if the network connection is down, the RJ 11