Vanner VLT12-1000 Owner's Manual

Manual is about: AC Power Inverter

Summary of VLT12-1000

  • Page 1

    Owner’s manual vlt series true sine wave ac power inverter vlt12-600 vlt12-1000 vlt12-1500 vlt24-600 vlt24-1000 vlt24-1500 vlt48-1000 vlt48-1500 owner’s manual d910106 rev. B rev. May 24, 2007 60hz models vlte12-600 vlte12-1000 vlte12-1500 vlte24-600 vlte24-1000 vlte24-1500 vlte48-1000 vlte48-1500 5...

  • Page 2

    Vanner incorporated vlt series true sine wave inverter - owner’s manual 2 vanner incorporated 4282 reynolds drive hilliard, oh 43026 800-ac power (800-227-6937) tel: 614-771-2718 fax: 614-771-4904 www.Vanner.Com e-mail: sales@vanner.Com © copyright 2007, vanner inc..

  • Page 3: Table of Contents

    Vanner incorporated vlt series true sine wave inverter - owner’s manual 3 table of contents section 1: introduction ................................................................................................................................. 4 model listing .........................................

  • Page 4: 1. Introduction

    Vanner incorporated vlt series true sine wave inverter - owner’s manual 4 1. Introduction thank you for purchasing a vanner vlt series inverter. We are confident that you will be satisfied with its performance and its many features. With proper installation and care, you can look forward to years of...

  • Page 5

    Vanner incorporated vlt series true sine wave inverter - owner’s manual 5 pure sine wave 120v rms -10% / +4% 2. Specifications & features specifications figure 1 inverter specifications vlt 12-1000 vanner vlt & vlte inverter specifications vlt 12-1500 continuous output surge (3s) a input voltage out...

  • Page 6

    Vanner incorporated vlt series true sine wave inverter - owner’s manual 6 standard features 1. True sine wave 120 volt ac output. 2. Resilient electronic protection designed to handle output short circuits and output overloads. 3. Load demand feature to conserve dc power under no load conditions. (n...

  • Page 7: 3. Safety Instructions

    Vanner incorporated vlt series true sine wave inverter - owner’s manual 7 3. Safety instructions readme warning: before you install and use your vlt series ac power inverter, be sure to read and save these safety instructions. This manual contains important safety and operating instructions for the ...

  • Page 8

    Vanner incorporated vlt series true sine wave inverter - owner’s manual 8 7. If the inverter has been dropped or damaged in any way, do not operate the inverter until it has been verified to be safe by a qualified technician. 8. To reduce the risk of electrical shock, always disconnect the ac and dc...

  • Page 9: Operation

    Vanner incorporated vlt series true sine wave inverter - owner’s manual 9 4. Component identification and description of operation figure 2 inverter top, right side & rear view (1) rear entry for negative dc input cable (2) rear entry for positive dc input cable (3) rear entry for remote control rs ...

  • Page 10

    Vanner incorporated vlt series true sine wave inverter - owner’s manual 10 figure 3 inverter top, left side & front view (6) battery voltage indicator the battery voltage bar graph indicates the voltage at the input terminals of the inverter. At low input current, this voltage is very close to the b...

  • Page 11

    Vanner incorporated vlt series true sine wave inverter - owner’s manual 11 (9) under voltage indicator indicates that the inverter has shut itself off due to input voltage under 10.0 volts (20.0 volts for 24 volt models). (10) over temperature indicator indicates that the inverter has shut itself of...

  • Page 12

    Vanner incorporated vlt series true sine wave inverter - owner’s manual 12 5. Installation and start up unpacking the inverter 1. Inspect the shipping container and equipment for loose or damaged parts. If any damage is found, immediately notify the freight carrier. Inverter installation considerati...

  • Page 13

    Vanner incorporated vlt series true sine wave inverter - owner’s manual 13 vlt12-600 vlt12-1500 vlt24-1000 vlt12-1000 vlt24-600 vlt24-1500 model # 7. Proper dc cable size is critical for the performance and safe operation of the inverter system. The minimum recommended cable size allows a ½ volt max...

  • Page 14

    Vanner incorporated vlt series true sine wave inverter - owner’s manual 14 ac output wiring installation procedure warning: before proceeding with the ac wiring, verify that the inverter is off and that the inverter is not connected to the battery. Serious or fatal electrical shock may occur. 1. The...

  • Page 15: Procedures

    Vanner incorporated vlt series true sine wave inverter - owner’s manual 15 6. Preventative maintenance and troubleshooting procedures there are no user serviceable components inside the inverter. If the inverter requires service, refer to vanner incorporated or other qualified service personnel. Pre...

  • Page 16

    Vanner incorporated vlt series true sine wave inverter - owner’s manual 16 problem symptoms and troubleshooting checks problem: inverter indicator light does not turn on. Check: verify dc voltage at the inverter. Problem: inverter indicator light is on but the ac load will not operate. Check: check ...

  • Page 17: 7. Appendix

    Vanner incorporated vlt series true sine wave inverter - owner’s manual 17 7. Appendix gfci test record for maximum protection against electrical shock hazard, operate the test switch on the ground fault circuit interrupter at least once a month and record the values in this supplied table. Figure 4...

  • Page 18

    Vanner incorporated vlt series true sine wave inverter - owner’s manual 18 vanner incorporated 4282 reynolds drive hilliard, oh 43026 800-ac power (800-227-6937) tel: 614-771-2718 fax: 614-771-4904 www.Vanner.Com e-mail: sales@vanner.Com © copyright 2007, vanner inc. V lt series owner’s manual d9101...