VAPamore MR-100 PRIMO Instruction Book And Users Manual - page 5
ACCESSORIES / BRUSHES
There are 4 brushes supplied with the Vapamore
MR-100 Primo. The brushes attach to the detail
adaptor by aligning the arrows and twisting to lock.
Suggested uses (Metal brush), Oven grills, BBQ grates,
cement stains, machinery, and metal surfaces. (Nylon
medium duty and large nylon brush), used for more
sensitive materials such as blinds, carpet, furniture, air
vents, shoe scuffs, soap scum. (Nylon grout brush), this
brush is used for harder less sensitive areas such as
grout lines on tile floors, stone, cement, and machinery.
IMPORTANT : With all brushes it is important to not
apply excessive pressure or force. This can cause failure
of the detail adaptor or related parts. When using the
brushes let the steam do the work and the brush to
help agitate the stain or area being cleaned. (Fig. 19 /20)
OPERATION
Fig. 19
ACCESSORIES / CLOTHES - FABRIC TOOL
ACCESSORIES / SMOOTH SURFACE TOOL
Fig.20
Fig. 21
Fig. 22
Fig. 23
ACCESSORIES / SCRAPER
Sanitize -
counter tops,
tile, stone,
granite, glass,
stainless steel,
walls, etc.
The scraper tool can be used to defrost freezers, on
oven walls and cook top surfaces to remove stuck on
food. This tool is also good for removing wall paper,
paint and shelve paper. (Fig.21)
Start by installing the supplied cotton cover on the
clothes - fabric / smooth surface tool. Now this tool can
be used for steaming and sanitizing along with
eliminating odors in garments, fabrics, furniture,
curtains, drapes, etc.
Using the clothes - fabric / smooth surface tool without
the cotton cover acts as a squeegee and is great for
sanitizing kitchen and bathroom counter tops chemical
free along with smooth surfaces such as stone, granite,
wood, glass, tile and stainless steel. (Fig.23)
GO TO VAPAMORE.COM TO SEE THE MR-100 PRIMO INSTRUCTIONAL VIDEO
BEDBUGS AND ALLERGENS
Use this tool on beading, pillows, and furniture by
applying light pressure and slowly passing it along the
surface to kill Bedbugs, dust mites and other allergens.
(Fig.22)
BEDBUG - DUST MITES - ALLERGENS
Fig.26
Fig.27
The detail adaptor can also be used on its own as a
straight jet nozzle tool or along with the 90 degree jet
nozzle attachment. These tools are great for cracks and
crevices. Make sure to concentrate the steam directly on
the area to be treated with as minimal distance as
possible, no more than 1’’ away. The steam will condense
and cool off and not be effective to kill pests and their
eggs if the jet tip is not directly on the surface being
treated. The detail adaptor can be attached directly to
the steam gun or to any of the extension tubes. (Fig. 28)
WHY USE STEAM?
GO TO VAPAMORE.COM TO SEE THE MR-100 PRIMO INSTRUCTIONAL VIDEO
The Vapamore MR-100 Primo produces steam with an output temperature between 210˚
to 220˚ degrees. Pests such as bedbugs, dust mites and other allergens along with their
eggs are killed on contact at a temperature of 180˚ degrees. Using steam is an extremely
effective and chemical free way to kill these pest along with E. Coli, Salmonella, H1N1 and
other bacteria or viruses without leaving any harmful chemical residue behind. The tools
supplied with the Vapamore MR-100 Primo allow you to treat all areas where these pests
can hide such as bedding, sofas, furniture, pillows, carpet, cracks and crevices that are
ideal hiding places for pests.
BEDDING / FURNITURE
Fig. 25
The clothes / fabric tool with the cotton cover is ideal for
treating bedding, furniture, pillows, and carpet areas
around bed posts and base boards. Start by installing
the supplied cotton cover on the clothes - fabric /
smooth surface tool. Apply light consistent pressure and
slowly pass it along the surface (1” per second) to insure
the area being treated has a chance to come to full
temperature killing pests and their eggs. (Fig.25)
The floor cleaning head with micro fiber cover is also
great for treating large surface areas such as bedding,
furniture, and carpet areas. Start by installing the
supplied micro fiber cover on the floor cleaning head.
The micro fiber cover thermal core maintains full
temperature during use and allows the floor cleaning
head to glide over fabric or carpet. (Fig.26)
Apply light consistent pressure and slowly pass it along
the surface (1’’ per second) to insure the area being
treated has a chance to come to full temperature killing
pests and their eggs. (Fig.27)
Carpet
BEDS
Detail adaptor
90 Deg. jet nozzle
Fig.28