Vaporetto ECO PRO 3000 Manual - page 14
VAPORETTO ECO PRO 3000
25
ENGLISH
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
The appliance does not turn
on.
Power cable (F) not plugged in
Boiler switch (B) off
Connect the power supply cable (F)
to a suitable electric socket.
Turn on the boiler switch (B).
The appliance is on but does
not supply steam
The appliance is not pressurised
yet
No water in the boiler.
Flexible hose (1) not inserted
correctly.
Steam adjustment dial (I) set to
the minimum.
Wait the pressure indicator (K) goes off.
Fill the boiler as described in the pa-
ragraph “Preparation”.
Insert the flexible hose completely.
Adjust the position of the dial (I) for
the desired increase.
A little steam is released from
the safety cap (A).
Damaged or missing seal.
Safety cap not screwed on com-
pletely.
Replace the safety-cap seal.
Turn off the appliance, unplug it from
the mains and wait for it to cool befo-
re screwing the cap back on.
Loss of steam from the con-
nection of the accessories.
Damaged or missing seals.
Replace the seals.
VT ECO PRO 3000 - 1U02 PRELIMINARE 2014:VT 2300 M0S05357 1L05
25/02/2014
14.26
Pagina 25