Varimixer V20 Operation Manual - page 7
7
Varimixer
BEAR
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
HOLD
Varimixer
BEAR
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
HOLD
Varimixer
BEAR
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
HOLD
6
5
4
7
8
2
3
1
Varimixer
I
0
BEAR
Place the tool in the bowl.
Place the bowl in the bowl arms.
Ensure that the bowl is placed correctly.
Place the mixing tool in the bayonet
shaft. The pin of the tool must be
turned into the bayonet hole.
Raise the bowl to working position by
pulling the handle forward. Ensure that
the bowl is placed correctly while the
bowl is lifted. Close the bowl screen.
Push the speed selector lever to obtain
the required speed.
The speed must be changed
only when the mixer is running.
On the timer set the time required, by
turning the timer to the right. The mixer
will stop automatically, when the time
runs out. Set the timer on HOLD when
not used; otherwise the mixer will not
start.
Before the mixer is stopped, the speed
selector lever must be moved to the low-
est speed.
The mixer must not be started
when loaded in high speed position.
Stop the mixer by pressing the red
stop button > STOP <
Start the mixer by pressing the green
start button > START <
The mixer must only be
started when the bowl is in work-
ing position, and bowl screen is
closed.
o
peraTing
i
nsTrUcTions