8.4’ diamondvue user guide 150.028 vt084 diamondvue series 8.4” flat panel series lcd monitors model numbers: vt084c · vt084p · vt084pss · vt084w vt084cxga · vt084pxga · vt084wxga vt084p3 · vt084rdd user’s guide read these instructions completely before attempting to operate your new color display. ...
8.4’ diamondvue user guide 150.028 table of contents page page section 1 section 4 introduction 1 touch screen 11 1.1 about lcd monitors 1 4.1 touch screen introduction 11 1.2 product safety precautions 2 4.2 touch screen definition 11 section 2 section 5 display setup 3 troubleshooting tips 12-13 2...
8.4’ diamondvue user guide 150.028 lcds introduction introduction 1 section about lcd monitors what you gain by using an lcd monitor in your industrial controls are the future of display technology. Although crts have dropped in cost significantly, they do not offer the performance, reliability, and...
8.4’ diamondvue user guide 150.028 product safety precautions ⇒ ensure that sufficient space is available around the display to provide the circulation necessary for cooling. ⇒ ensure that the ambient air temperature will not exceed the specified maximum temperature. ⇒ do not attempt to service this...
8.4’ diamondvue user guide 150.028 section 2 display setup display setup vt084 series display features ⇒ the vt084 is capable of displaying 256k colors in a continuous spectrum. The high contrast lcd enhances the image with no geometric distortion. ⇒ the vt084 series directly accepts an analog 5 wir...
8.4’ diamondvue user guide 150.028 2.2 unpacking and setting up your display your lcd monitor package will consist of the components listed below. Open shipping container and lay all components on a flat clean surface. What is included with your display ⇒ vt084p, vt084c, vt084w lcd monitor ⇒ 5 ft vi...
8.4’ diamondvue user guide 150.028 2.6 signal connections cont. You can use an hd-15 connector cable or a bnc adapter cable to connect the flat panel monitor to the host computer. The hd-15 video cable (supplied in the kit) you use with this monitor is equipped with a conventional hd-15 connector at...
8.4’ diamondvue user guide 150.028 optional bnc adaptor cable a 5-bnc-to-hd-15 adapter cable is available. The functions of the cables are described below. ⇒ r, b, and g: red, green, and blue input connectors to establish color. These are used for rs-343 analog signals. ⇒ hs/cs: separate horizontal/...
8.4’ diamondvue user guide 150.028 adjusting the display definition of osd (on screen display) adjustments the vt084 series display has an embedded microprocessor in the converter card. Once you have the unit to display vga do the following: in order to navigate to the appropriate adjustments, press...
8.4’ diamondvue user guide 150.028 3.3 adjustment procedure 8 automatic adjustment press menu and the automatic adjustment will be the first item to appear on the osd. Hit select and then press the up/down button to navigate to geometry. Press select again and the display will automatically adjust t...
8.4’ diamondvue user guide 150.028 adjustment procedure cont. 9 osd display menu color color temperature adjustments allows the user to adjust for desired white balance. This can be achieved by adjusting the color temperature control or adjusting the individual red, green or blue controls. Press men...
8.4’ diamondvue user guide 150.028 10 adjustment procedure cont. 3.3 osd display menu advanced the advanced control allows for several advanced adjustments. Factory preset sharpness osd horz. Pos osd vert. Pos factory preset the vartech display has a number of standard settings installed at the fact...
8.4’ diamondvue user guide 150.028 touch screen touch screen 11 4 section touch screens are a common means to interface operator inputs to a system. The universal standard of windows gui (graphical user interface) has significantly increased the use of touch screens. There are four main touch techno...
8.4’ diamondvue user guide 150.028 12 troubleshooting troubleshooting section 5 troubleshooting trouble troubleshooting tip no picture • the signal cable should be properly connected to the display card and computer. • try disconnecting the video cable from the display and connecting to a crt displa...
8.4’ diamondvue user guide 150.028 trouble troubleshooting tip screen is blank. • screen saver activated. • video cable problem. Check for proper installation • change video cable • faulty video display. Needs service image is dim, even with brightness and contrast controls set full up. • video cabl...
8.4’ diamondvue user guide 150.028 cleaning occasionally clean the display panel and cabinet with a soft cloth dampened (not soaked) with a mild (non-abrasive) glass cleaner. Keep turning a fresh side of the cloth toward the screen surface to avoid scratching it with accumulated grit. Do not use pap...
8.4’ diamondvue user guide 150.028 15 section 7 mechanical drawings mechanical drawings model description page vt084c 8.4” chassis mount mechanical drawing 16 vt084p 8.4” panel mount mechanical drawing 17 mechanical drawings vt084w 8.4” wall mount mechanical drawing 18 vt084rdd 8.4” dual rack mount ...
8.4’ diamondvue user guide 150.028 20 specifications specifications 8 section panel size 8.4” type active matrix color thin film transistor (tft) resolution capabilities vga pixel pitch 0.297mm active display area: 6.7” x 5.1” / 170mm x 130mm pixel format vt084c, vt084p, vt084pss, vt084w 640 x 480 v...
8.4’ diamondvue user guide 150.028 150-028-005 9.9.04 vartech systems inc. Headquarters 11529 sun belt ct. Baton rouge, louisiana 70809 toll-free: 800.223.8050 international phone: 001.225.298.0300 fax: 225.297.2440 e-mail: sales@vartechsystems.Com www.Vartechsystems.Com.
