VarTech Systems VT084C User Manual - Product Safety Precautions
8.4’ DiamondVue User Guide 150.028
Product Safety Precautions
⇒
Ensure that sufficient space is available around the display to provide the
circulation necessary for cooling.
⇒
Ensure that the ambient air temperature will not exceed the specified
maximum temperature.
⇒
Do not attempt to service this display yourself. The rear chassis has a seal so
that non qualified personal will not expose themselves to dangerous voltages
or other risks.
⇒
To protect from electrical shock, unplug the display power supply from the wall
before moving.
⇒
Do not expose the display to direct sunlight or heat.
⇒
Do not use this display near water
⇒
Do not place any heavy objects on the power cords. Damage may cause
electrical shock.
⇒
Unplug the power supply from the wall or unit if one of the following conditions
exists.
⇒
Power cord or plug is damaged or frayed.
⇒
Liquid is spilled into the display or the display is exposed to rain or
water.
⇒
The display does not operate normally when the operating
instructions are followed.
⇒
The display has been dropped or the enclosure has been
damaged.
⇒
The display exhibits a distinct change in performance, indicating a
need for service.
1.2
2