14” fast scan series user guide 150-049 14” console mount auto sync color monitor model number: vt14b-c1 user’s guide read these instructions completely before attempting to operate your new color display. Vartech systems inc. Solutions for demanding applications industrial crt and flat panel displa...
14” fast scan series user guide 150-049 table of contents sections page warning and caution 1 operating instructions 2 controls 4 mode operations 5 specifications 7 5bnc connectors 3 chassis mount mechanical 6.
14” fast scan series user guide 150-049 -1- the following warnings and cautions are for your safety, for the prevention of injury from electric shock and for the safe operation of the monitor. Please read them carefully. ♦ do not block the ventilation slots or insert any objects into the monitor thr...
14” fast scan series user guide 150-049 -2- video signal correction the monitor is supplied with a 15pin hd connector (hd15f), 5bnc input connectors and an optional 9pin connector (db9f) arranged as shown below: b v g r h on off 75 Ω ∗ hiz on off disabled enabled* dip switch *factory default ddc 1 1...
14” fast scan series user guide 150-049 bnc connectors these connectors allow the monitor to work with red, green and blue coaxial cable. The monitor synchronization may be sync on green, composite sync or separate horizontal and vertical sync. The “h” input is used for composite sync. Video inputs:...
14” fast scan series user guide 150-049 — + — + 5 — + — + — + — + led function contrast brightness horizontal position horizontal size vertical position (keystone)* vertical size (pincushion)* vt switch digital controls the digital controls are located on the rear side of the monitor. Digital displa...
14” fast scan series user guide 150-049 -5- mode operations in the normal mode of operation, the led is not flashing. Disable keypad 1. Press and release the function (upper right) switch. The led will now be flashing. 2. Simultaneously press the function and the vt (upper left) switches. Note that ...
14” fast scan series user guide 150-049 -7- engineering specifications size 14” pitch .28mm resolution capabilities cga to xga active display area 11” x 8.3” / 279.4mm x 210.82mm deflection angle 90º phosphor medium short b22 power source 90 - 265 volts ac autoranging 50/60 hz, 1.5 amps ac power con...
14” fast scan series user guide 150-049 150-049-001 6.17.03 vartech systems inc. Headquarters 11529 sun belt ct. Baton rouge, louisiana 70809 toll-free: 800.223.8050 international phone: 001.225.298.0300 fax: 225.297.2440 e-mail: sales@vartechsystems.Com www.Vartechsystems.Com.
