VarTech Systems VT150CC User manual - Osd Functions
VT150 ColorVue Series User Guide
150-032
OSD Functions
Symbol
description
Function
POSITION
Setup the image position within the panel. There are two items:
H-POSITION · V-POSITION.
H-POSITION
H-Position is used to adjust the horizontal image position
manually.
A slider with current value is displayed.
V-POSITION
V-Position is used to adjust the vertical image position
manually.
A slider with current value is displayed.
IMAGE
Configure the image frequency.
PHASE
Phase is used to adjust the ADC sample pixel clock.
A slider with the current value is displayed. The range of phase
adjustment value is 0 to 100 for 0 to 360 degrees.
CLOCK
Clock is used to adjust the number of clocks (pixels) per line
(sample per line).
A slider with current value is displayed.
MISC MENU
Miscellaneous setting. There are three items: RESET · OSD
POSITION · SYSTEM INFO.
RESET
Reset is used to reload all factory default parameters.
OSD POSITION
OSD Position is used to setup the OSD menu position. The
OSD menu horizontal and vertical position is adjusted
separately. Each position adjustment item will bring up the
slider window. The maximum value of the sliders are based on
the size of the OSD menu.
SYSTEM INFO
The system info menu provides the user with detailed
information regarding the current input format and version.
(VERSION · V-FREQ · H-FREQ · RESOL).
12
Note:
If you don’t press any key for 45 seconds, the OSD will disappear by itself and the parameters will
not be saved.