VarTech Systems VT170 WX User manual - page 12
3.1.3
Setup Adjustments
NOTE: The following adjustments are all under the ADJUSTMENT category. The outlined
procedure covers the sequential adjustments under this category. If you desire to move to an-
other category, press MENU and the UP or DOWN button and proceed to the desired
category.
All adjustments are graphically illustrated in yellow along with a digital value
LANGUAGE
Press MENU.Press the UP or DOWN button until you reach the SETUP
ADJUSTMENT category. Next press the SELECT button. Press the UP or DOWN
button until you reach LANGUAGE. Press the UP or DOWN arrow to select ENGLISH,
ITALIANO, ESPANOL or DEUTSCH.
IMAGE SIZE
Press MENU.Press the UP or DOWN button until you reach the SETUP
ADJUSTMENT category. Next press the SELECT button. Press the UP or DOWN
button until you reach IMAGE SIZE. Press SELECT for full picture size.
OSD H POSITION
Press MENU.Press the UP or DOWN button until you reach the SETUP
ADJUSTMENT category. Next press the SELECT button. Press the UP or DOWN
button until you reach OSD H POSITION. Press SELECT . Press the UP or DOWN
arrow to adjust the horizontal position of the OSD window. Press the UP or DOWN button
to OSD V POSITION.
OSD V POSITION
Press MENU.Press the UP or DOWN button until you reach the SETUP
ADJUSTMENT category. Next press the SELECT button. Press the UP or DOWN
button until you reach OSD V POSITION. Press SELECT . Press the UP or DOWN
arrow to adjust the vertical position of the OSD window. Press the UP or DOWN button to
proceed to the next adjustment.
TRANSPARENCY
Press MENU.Press the UP or DOWN button until you reach the SETUP
ADJUSTMENT category. Next press the SELECT button. Press the UP or DOWN
button until you reach TRANSPARENCY. Press SELECT . Press the UP or DOWN
arrow to adjust the transparency to the desired level . Press the UP or DOWN button to
proceed to the next adjustment.
ZOOM
Press MENU.Press the UP or DOWN button until you reach the SETUP
ADJUSTMENT category. Next press the SELECT button. Press the UP or DOWN
button until you reach ZOOM. Press SELECT . Press the UP or DOWN
arrow to adjust zoom as desired. NOTE: The H and V zoom positions are fixed.
10