1. DL manuals
  2. VarTech Systems
  3. Monitor
  4. VT29B-M
  5. User Manual

VarTech Systems VT29B-M User Manual

Manual is about: 29 Inch Auto Sync Color Display

Summary of VT29B-M

  • Page 1

    Vt29 b-m 29” auto sync color display user’s guide read these instructions completely before attempting to operate your new color display . Vartech systems inc. Solutions for demanding applications industrial crt and flat panel displays.

  • Page 2: Fcc Information

    This equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment ge...

  • Page 3: Table of Contents

    Table of contents warning and caution .............................................................................. 2 important safety instruction .................................................................... 3-4 connecting the monitor ...........................................................

  • Page 4: Warning and Caution

    Warning and caution warning 1. To prevent fire or shock hazard, do not expose this monitor to rain or moisture. 2. High voltage exists on the cathode-ray tube anode lead of this monitor. Before servicing, determine the presence of high voltage by connecting a h.V. Meter between the anode of crt cap ...

  • Page 5

    Important safety instructions before operating this equipment, please ensure that you have carefully followed all the procedures outlined in the user’s manual. 1. Read all instructions 2. Save these instructions for later use 3. Follow all warnings and instructions marked on the product 4. Unplug th...

  • Page 6

    11. If an extension cord is used with product, make sure the amperage rating of the extension cord matches the rating of the product. Also, make sure the total of all products plugged into the wall outlet does not exceed 15 amperes. 12. Never push objects of any kind into this product through cabine...

  • Page 7: Connecting The Monitor

    Connecting the monitor 1. Be sure the monitor and the system unit are switched off. 2. Connect the power cord into the ac input of the monitor. 3. Connect the 15-pin connector of the signal cable to the video control- ler of the pc, or your signal source. 4. Connect the signal cable to the monitor. ...

  • Page 8: User’S Controls

    Selects osd function on menu to adjust the display settings of monitor. The osd will auto- matically disappear after 10 seconds of inactivity. + - increases and decreases value of selected osd function. Osd operation depress any of four adjustment buttons located on front of monitor to activate osd....

  • Page 9: Monitor Operation

    Monitor operation 7.

  • Page 10

    Power 1 4 7 0 2 5 8 3 6 9 vol vol ch. Ch. Review mute color monitor hand held remote operation 1 2 3 4 on dip 1 2 3 4 on dip 1 2 3 4 on dip 1 2 3 4 on dip = 1 = 6 1 2 3 4 on dip 1 2 3 4 = 7 on dip = 2 1 2 3 4 on dip 1 2 3 4 = 8 on dip = 3 = 4 = 9 1 2 3 4 1 2 3 4 on dip on dip on dip on dip 1 2 3 4 1...

  • Page 11: Power Management Function

    Power management function the power management function, which is controlled through the computer, provides four distinct power states. On the normal operating condition. The power led will show green. Standby the screen blanks after a pre-set amount of idle time. The power led will appear amber in ...

  • Page 12: Trouble Shooting

    Trouble shooting the following chart describes some possible trouble shooting techniques. Please refer to this chart for trouble shooting before contacting a service dealer problem cause remedy no picture • power cord • connect power cord disconnected • power switch is off • turn the power switch on...

  • Page 13: Crt Specifications

    Crt specifications model vt29b-m view size 27” (68cm) deflection 110 deg phosphor p22 dot pitch 0.62 mm faceplate flat 11.

  • Page 14: Specifications

    Specifications scanning frequencies horizontal: 30-48 khz vertical: 50-120 hz input signal video: rgb analog, 0.7vpp / 75 ohm sync: separate (h/v), composite (h+v), sync on green (sync on green may require color reset to display white) connectors: hd-15 female d-sub connector, 5 x bnc monitor automa...

  • Page 15: Specifications

    Agency approvals safety: ul listed: ul 1950 (3 rd edition) cul listed: csa no. 22.2 950 fda: dhhs 21 cfr subchapter j accession no 0220210-00 tuv/gs en60950 emi emissions: fcc: cispr 22/fcc part 15, subpart b, class a ce: emc 89/336/eec, lvd 73/23/eec en55022, en55024, en61000-3-2, en61000-3-3, en61...

  • Page 16: Appendix: Timing Charts

    Appendix: timing charts 14.

  • Page 17: Vartech Systems Inc.

    Vartech systems inc. Headquarters 11529 sun belt ct. Baton rouge, louisiana 70809 toll-free: 800.223.8050 international phone: 001.225.298.0300 fax: 225.297.2440 e-mail: sales@vartechsystems.Com www.Vartechsystems.Com 150-068 3.07.05.