Solutions for demanding applications vartech s y s t e m s i n c. 17.0” panel mount pc model vtpc170p / pss user’s guide read these instructions completely before attempting to operate your new panel mount pc.
17.0 panel mount pc 486-0003-01-03 2 revision history date rev no summary page 8/11/08 00 first issue 10/07/08 01 revised panel mounting drawing 6 12/08/08 02 identify ports on bottom panel view 7 7/09/09 03 revised detail a, connector view & system spec. 5 thru 8 12/07/12 04 revised mechanical draw...
17.0 panel mount pc 486-0003-01-03 3 safety instructions read the safety instructions carefully and keep it for use later. the chassis metalwork of the module must be installed properly to the main earthing termination for class 1 equipment. care must be exercised in the application of the sys...
17.0 panel mount pc 486-0003-01-03 4 standard technical specifications: lcd monitor: size / type 17.0” xga tft lcd native resolution 1280 x 1024 contrast ratio 800:1 viewing angles horizontal: 160° vertical: 160° pixel pitch 0.264mm brightness (typical) 300 cd/m² response time (typical) 5ms colors s...
17.0 panel mount pc 486-0003-01-03 5 touch screen resistive touch screen interface usb power input 100 - 240 vac 1.5a 50/60 hz 12 - 24 vdc (optional) 6 – 32 vdc without dvd (optional) power consumption 51w temperature operational: 32°f to 140°f 0°c to 60°c storage: -4°f to 149°f -20°c to 65°c humidi...
17.0 panel mount pc 486-0003-01-03 6 panel mount procedure panel mounting procedure: 1- cut and drill the panel (refer to the panel mount drawing, figure a). Measurements are provided in inches and millimeters. Panel mounting cutout: 1- if access to the bottom of the enclosure is not available follo...
17.0 panel mount pc 486-0003-01-03 7 panel mount drawing: detail –a– connections to the panel mount pc bottom rear view -connector panel-.
17.0 panel mount pc 486-0003-01-03 8 power connection (power in) the panel mount pc includes an ac line cord which is 6ft long. The power input receptacle is located on the bottom rear panel of the system. Serial connections (com 1-3) the panel mount pc is supplied with three serial connectors confi...
17.0 panel mount pc 486-0003-01-03 9 lcd monitor warm-up time all lcd monitors need time to become thermally stable the first time you turn them on. Therefore, to achieve more accurate adjustments for parameters, allow the lcd monitor to warm (be on) for at least 20 minutes before making any screen ...
