Solutions for demanding applications vartech s y s t e m s i n c. 17.0” panel mount pc model vtpc170p / pss user’s guide read these instructions completely before attempting to operate your new panel mount pc.
Revision history date rev no summary page 8/11/08 00 first issue 10/07/08 01 revised panel mounting drawing 6 12/08/08 02 identify ports on bottom panel view 7 17.0 panel mount pc 486-0003-01-01 2.
Safety instructions • read the safety instructions carefully and keep it for use later. • the chassis metalwork of the module must be installed properly to the main earthing termination for class 1 equipment. • care must be exercised in the application of the system to prevent overheating. Ensure th...
Standard technical specifications: lcd monitor: size / type 17.0” xga tft lcd native resolution 1280 x 1024 contrast ratio 800:1 viewing angles horizontal: 160° vertical: 160° pixel pitch 0.264mm brightness (typical) 300 cd/m² response time (typical) 5ms colors supported 16.7 million computer system...
Power input 100 - 240 vac 1.5a 50/60 hz 12 - 24 vdc (optional) 6 – 32 vdc without dvd (optional) power consumption 51w temperature operational: 32°f to 140°f 0°c to 60°c storage: -4°f to 149°f -20°c to 65°c humidity operational: 20 to 40°c, 90% rh nc storage: 5 to 65°c, 28% rh nc installation of you...
Panel mounting procedure: 1- cut and drill the panel (refer to the panel mount drawing, figure a). Measurements are provided in inches and millimeters. Panel mounting cutout: 1- if access to the bottom of the enclosure is not available following installation, attach the power and all necessary cable...
Connections to the panel mount pc bottom rear view -connector panel- power connection (power in) the panel mount pc includes an ac line cord which is 6ft long. The power input receptacle is located on the bottom rear panel of the system. Serial connections (com 1-2) the panel mount pc is supplied wi...
Turning the system on and off before connecting the panel mount pc to power, connect any peripheral devices. As a general rule, any peripheral device should only be connected or disconnected when the panel mount pc is off with the exception of any usb or 1394 peripheral. The panel mount pc is turned...
