Varytec ARC One Manual - page 17
17 / 23
Menu 3
Manual
Press ENTER. Now the display shows CH01 – CH17 with a following number
with 3 digits. Here you can adjust manually every Channel which you would
control by dmx normal. Choose the right channel by using the UP/DOWN
Buttons, then confirm with ENTER, now use the UP/DOWN Buttons for
choosing the desired value, and confirm again with ENTER. Repeat this step
until you set all channels to the desired values. With MENU you can step back
to the former menu.
With the UP/DOWN Buttons you can step to the next menu:
Menu 4
Test
Press Enter and the Display shows one of the following points:
MAuto: x,
Press Enter to enter the menu. Now use the UP/DOWN Buttons to
change the value. You can choose from the Auto Movement
Program 1-9. Press again ENTER to confirm and save your
settings.
Auto:x
Press Enter to enter the menu. Now use the UP/DOWN Buttons to
change the value. You can choose from the Auto LED Program 1-
9. Press again ENTER to confirm and save your settings.
MSound:x
Press Enter to enter the menu. Now use the UP/DOWN Buttons to
change the value. You can choose from the Sound Movement
Program 1-9. Press again ENTER to confirm and save your
settings.
Sound:x
Press Enter to enter the menu. Now use the UP/DOWN Buttons to
change the value. You can choose from the Sound LED Program
1-9. Press again ENTER to confirm and save your settings.
Tilt:xxx
Press Enter. Now you can use the UP/DOWN Buttons tos et a
fixed value from 1-512 for the Tilt axis. Works only while there is
no other movement set. Press again ENTER to confirm and save.
With the UP/DOWN Buttons you can step to the next menu:
Menu 5
PassWord
Press ENTER. The Display shows PassWord UnLock, or PassWord Lock.
Choose with UP/DOWN the desired menu to set up.
PassWord UnLock
Press ENTER. Now you can set up three
numbers by using ENTER and UP/DOWN
buttons. Set the correct three numbers to unlock
the unit. The changes will be valid when the unit