Varytec Laser Moonstar MK II User Manual - page 17
17 / 22
8.5. Manual Running Mode (MAN)
Press FUNC, until LED or RGB or RDE is shown in LED display panel. LED mode is preprogramed
effect of LED. RGB mode is manual setting of LED effect. Once RGB mode is confirmed by press
ENTER, the setting goes into 4 specification setting. Every pressing ENTER, it goes into next
specification setting, until RGB is shown again. There 4 specification setting are listed below:
NO.
DISPALY
DESCRIPTION
1
R 0~R 9
Red laser strobe frequency, fast -> slow.
2
G 0~G 9
Green laser strobe frequency, fast -> slow.
3
SR0~SR9
LED Strobe frequency fast
slow
RDE mode is LED RAINBOW FADE FROM COLOR TO COLOR
NO.
DISPALY
DESCRIPTION
1
SP 0~SP 9
LED RAINBOW FADE SPEED (0-100%)
8.6. DMX MODE
Press FUNC to enter MODE OPTION
Till to LED panel shows 001.
Press ENTER to confirm the setting.
The laser is working in
“
DMX MODE
”
. With help of UP/DOWN button,
it could be easily change the DMX address of the laser.
8.7. MASTER/SLAVE MODE
Press FUNC to enter MODE OPTION
Till to LED panel shows SLA
Press ENTER to confirm the setting.
The laser is working in
“
SLAVE MODE
”
. Connect MASTER laser
and SLAVE lasers with DMX cable, the SLAVE lasers do what
exactly MASTER laser does. Check
“
5.2 DMX connection
”
to have
more details about laser connection.