Summary of Strobe Mini LED20
Page 1
Manual strobe mini led20
Page 2
2 / 12 table of contents 1. Safety instructions ............................................................................................................................ 3 1.1. For safe and efficient operation ............................................................................ 3 1.2. Fur...
Page 3
3 / 12 1. Safety instructions • this device is suitable for indoor use (not outdoors) only. • all modifications to the device will void the warranty. • repairs are to carry out by skilled personnel only. • use only fuses of the same type and original parts as spare parts. • protect the unit from rai...
Page 4
Important: damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or problems. Make sure the electrical connection is carried out by qualified perso connections have to be carried out according to the european s...
Page 5
Prevent that the power cable has contact power connections. Don’t touch them with clammy hands. Make sure that the voltage which is to connect not exceeds the specified values. Make sure that it isn’t possible to squeeze or damage the yourself with regular checks that there are no damages to the pow...
Page 6
You have to attend that with an ambient temperature von 40°c it is not allowed that the relati humidity exceeds 50%. Operate the device not during thunderstorms. Surge voltages could destroy the device. Unplug the power supply during thunderstorms. During the installation the use of the mounting bra...
Page 7
7 / 12 basically installation has to be made by using a second separate suspension. This can be e.G. A suitable net. The second suspension must be designed and attached so no part of the installation can fall down in case of failure. During construction, reconstruction and deconstruction unnecessary...
Page 8
8 / 12 truss or an appropriate fastening point. Hang up the end in the fastening element and tie up the locking nut. A safety rope once exposed to failing load or damaged may not be used furthermore. The maximum drop exceed must not exceed 20cm. A safety rope once exposed to failing load or damaged ...
Page 9
9 / 12 2. Introduction thank you for buying the strobe led 100dmx. It is a powerful device. For a successful installation and operation, please read this manual carefully. 3. Connections 3.1. Electrical connections if you wish to change the power supply settings, see the chapter appendix. Connect th...
Page 10
10 / 12 if you using a controller with 5 pins dmx output, you need to use a 5 to 3 pin adapter-cable. 4. Control to get to the menu you have to press menu. With up/down you can scroll through the menu. If you have reached the desired point of menu press enter. With up/down you can make your desired ...
Page 11
11 / 12 6. Technical data power supply voltage ac110-240v, 50/60hz power consumption max. 28 w battery no light source lm type smd leds power 19,2 w number/power 48/0,4 w optics flash rate 0-20 flashes/s connections current in schutzko current out no xlr in/out 3pin controlling sound-to-light yes au...
Page 12: B & K Braun Gmbh
12 / 12 importer: b & k braun gmbh industriestraße 2 d-76307 karlsbad www.Bkbraun.Com info@bkbraun.Com.