Vax action 802 U86-AB-Be Get Started - page 4
Getting started
Name
Action 802 Series
Voltage
220-240V~50Hz
Wattage
750W
Cord length
8/10m
Weight
6.5kg
Technical Specification
Filter Kit (Type 98)*
1-1-134233-00
Belt Kit (Type 1)*
1-1-130669-01
Pro Cleaning Kit (Type 2)
1-1-133326-00
Turbo Tool (Type 6)
3 in 1 Tool
1-1-134419-00
Accessories & Consumables
Carry handle
Hose
Handle
Extension tube
Dirt container release button
Power on / off button
Pre-motor filter
Separator
Dirt container
Post-motor filter
Carpet height
adjuster
Handle release button
Quick release
cord hook
Hose to machine
connector
Getting to know your machine
Insert the back panel
into the floorhead.
Insert the lower cord
hook into the hole
at the bottom of the
back panel.
Now take the small
clip and push it down
between the end of the
cord hook and the
machine, to lock the
cord holder in place.
Place the dirt container onto the machine.
Ensure the dirt container tabs line up with
the holes in the post motor filter cover.
Assembling your upright
Ensure that the back of
the dirt container connects
to the inlet tube.
Place dirt container on
machine and click into
place at the back panel.
Insert the short end of the
hose into the tube at the
back of the machine and
turn to lock.
Push the hose end into the
hose to machine connector.
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Wrap the power cord around the quick
release cord hook at the top and the lower
cord hook, continue wrapping the power
cord until it is secure.
Attach TurboTool clip to the
handle. Snap TurboTool
into position.*
Inset the handle into the
top of the back panel until it
clicks into place.
U86-AB_e_Series_Action_802_UG_[J2543]_Amd_02.07.14.indd 6-7
02/07/2014 13:47