Vax action 802 U86-AB-Be Get Started - page 7
Changing the belt
Switch off your vacuum
cleaner at the main socket
and unplug. Remove the
4 screws on the bottom
of the floorhead.
Lift the brush from the
machine starting at the
side without the belt on.
Squeeze the sides of the
floor plate to release it.
Unhook the belt from the
motor spindle in the belt
compartment. (This may
be easier if you use a
screwdriver to do this).
Remove the floor plate.
Place the new belt
around the brush bar.
Remove the belt cover.
Let’s talk technical
Feed the other side into
the belt compartment.
Using a screwdriver,
hook the belt onto the
motor spindle.
Reinsert the brushbar. One end of the
brushbar has a square slot, and one end
has a circular slot, ensure that it is put
back into the correct position.
Accessories
Don’t forget your accessories!
Order at:
www.vax.co.uk/spares-and-solutions
Pro cleaning kit
1-1-133326-00
All our best tools all in one kit that makes cleaning
your home quicker, easier and with even better results.
We’ve taken care of cleaning all of the hard to reach
areas such as on top of cupboards and in between
blinds to the dust that collates behind and
within the radiator.
Flexi Crevice Tool
1-1-131393-00
A handy long, flexible tool for getting far behind and
around furniture.
TurboTool (Type 6)
1-1-134419-00
Use the TurboTool for vacuuming your stairs,
upholstery and car interiors. It’s great for picking
up stubborn pet hair.
Flat Upholstery Tool
1-1-131394-00
Cleans large areas of upholstery like sofas and
curtains, quickly and effectively.
3 in 1 Tool
1-1-129167-00
3-in-1 tool includes crevice tool for awkward
areas and corner, dusting brush for areas such
as skirting and an upholstery tool for cleaning
sofas, curtains, chair seats and car interiors.
U86-AB_e_Series_Action_802_UG_[J2543]_Amd_02.07.14.indd 12-13
02/07/2014 13:47