Summary of Air3 Pet Plus VRS114
Page 1
Vax.Co.Uk vrs114 pet plus let’s get started.
Page 2: Let’S Talk Safety
Let’s talk safety basic safety precautions don’ts do’s this vacuum cleaner is intended for household use only and not for commercial or industrial use. • only use the vacuum cleaner indoors on dry surfaces and keep the area you’re cleaning well lit. • keep fingers, hair and loose clothing away from ...
Page 3: As Instructed In This Guide.
• this vacuum cleaner can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the vacuum cleaner in a safe way and understand the haz...
Page 4: @vaxuk
Thank you for buying this air3 pet plus taking care of your carpets and hard floors the air3 pet plus is designed to make vacuuming carpets and hard floors regularly, as effective and efficient as possible and this user guide will help you get the most out of your machine. Maintaining your carpets a...
Page 5: Contents
Contents let’s talk safety getting to know your machine getting started using your machine taking care of your machine let’s talk technical accessories notes what to do if it goes wrong getting in touch air3 pet plus (included with all models) 2-in-1 crevice tool and dusting brush included with your...
Page 6: Technical Specification
Getting to know your machine hose power cord 2-in-1 tool storage clip upholstery tool storage clip handle release button handle carry handle inner cyclones dirt container lid shroud dirt container separator post-motor filter cover/post-motor filter (hidden) hose entry point hose end clip dirt contai...
Page 7: Getting Started
Before you begin push the handle into main body until it clicks into place. Fit the upholstery tool into storage clip. Fit the 2-in-1 crevice tool and dusting brush onto storage clip. Insert hose into hose entry point, press hose end clip and attach over raised rim. Please read ‘let’s talk safety’ a...
Page 8: Using Your Machine
Using your machine tip the brushbar will not rotate when the vacuum cleaner is in the upright position. Plug into mains and press on/off button to switch on. Place your foot onto the floorhead and pull handle backwards to recline. Press the brushbar on/off button to activate the brushbar. Pressing t...
Page 9: Using Your Machine
Using your machine choose an accessory. Press the hose end clip, pull hose to release. Attaching tools to the hose important: always switch off the vacuum cleaner before disconnecting or connecting hose and accessories. The accessories can be attached to the handle using as a telescopic extension tu...
Page 10: Taking Care of Your Machine
Tip cleaning the pre-motor filter and shroud emptying the dirt container press the dirt container release button, pull to remove the dirt container. Hold dirt container over a bin. Press the dirt release clip, allowing dirt/debris to fall out. Wash the filter under running water ( 40’c max) leave to...
Page 11: Taking Care of Your Machine
Taking care of your machine advanced cleaning of shroud and separator post-motor filter maintenance important: unplug and switch off vacuum cleaner before performing maintenance or troubleshooting checks. Turn skirt on shroud clockwise to unlock and remove. Using a soft brush, remove any dirt/debris...
Page 12: Let’S Talk Technical
Let’s talk technical removing debris from brushbar important: any obstruction or blockage will automatically stop the brushbar rotating. A red light will indicate a jammed brushbar. Using a crosshead screwdriver, remove 3 screws from the belt cover on the side of the floorhead. Lift and separate bru...
Page 13: Let’S Talk Technical
Let’s talk technical changing the belt using a crosshead screwdriver, remove 3 screws from the belt cover on the side of the floorhead. Pull to remove the brushbar location plate. Remove belt. Slide off the locking ring. Line up the tabs on front of housing and re-fit. Slide locking ring into groove...
Page 14: Accessories
Accessories don’t forget your accessories! Order at: www.Vax.Co.Uk/spares-and-solutions pro cleaning kit (type 2) 1-1-133326-00 all our best tools all in one kit that makes cleaning your home quicker, easier and with even better results. We’ve taken care of cleaning all of the hard to reach areas su...
Page 15: What To Do If It Goes Wrong
What to do if it goes wrong • check the ‘getting started’ page in this guide or the box that the machine came in to make sure that the part is definitely included in your unit if you do find you have an accessory missing, we’re here to help. Simply call us on 0330 026 8455. • it may not be plugged i...
Page 16: What To Do If It Goes Wrong
What to do if it goes wrong getting in touch caution: to reduce the risk of personal injury, unplug the vacuum cleaner before performing maintenance /troubleshooting checks. • the brushbar may not be turned on. Go to ‘getting started’. • the belt maybe broken. Go to ‘lets talk technical’ • the unit ...
Page 17: Getting In Touch
Getting in touch * calls are charged at the uk local rate. Please make a note of the serial number and model number of the product before calling. † registration required. Terms and conditions apply, see vax.Co.Uk for details..
Page 18: Notes
Notes.
Page 19: Notes
Notes.
Page 20: @vaxuk
Vax ltd., 5th floor 2 colmore square, 38 colmore circus, queensway, birmingham, b4 6bn, uk email: info@vax.Co.Uk website: vax.Co.Uk eec statement of compliance: manufacturer/eec importer: vax limited, hereby on our own responsibility, declare that the vrs114 is manufactured in compliance with the fo...