Vax C86-AW Let's Get Started - page 4
Assembling your machine
Press both buttons at the
end of hose and insert into
hose entry point.
Insert hose grip into
telescopic extension tube.
Press button on telescopic
extension tube and adjust
to required length.
Insert the other end of the
telescopic tube into the
floor head.
Getting to know your machine
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Carrying your machine
Always use the carry handle to lift and carry your vacuum cleaner. Do not use the dirt container release handle.
The dirt container should be locked into place before lifting the vacuum cleaner by the carry handle.
Getting started
Name
Air Silence
Voltage
220-240V~50Hz
Wattage
800W
Cord length
6-6.5m
Weight
5.5kg
Technical Specification
Subject to technical change without notice.
Filter kit (Type 111)*
1-1-134395-00
TurboTool (Type 5)*
1-1-134418-00
Tool connector (Type 1)*
1-1-133838-00
Combination floor tool (Type 6)*
1-1-134330-00
3-in-1 Tool (Type 1)
1-1-129167-00
Accessories & Consumables
*
To purchase consumables and accessories, please visit
vax.co.uk
Post-motor filter (hidden)
Carry handle
Separator and shroud
Floor head parking slot
Power on/off button
Hose entry point
Dirt container
release button
Pre-motor filter (hidden)
Dirt container
Cord rewind button
Post-motor filter cover
and release button
Before you begin cleaning
• Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments, or removing
and emptying the dirt container.
• The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the thermostat
will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner off and unplug from electrical
socket. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the vacuum cleaner to
cool for approximately 1 hour (if you have cleaned the filters please wait 24 hours for the filters to fully dry before putting
back into the vacuum).
• Filters require cleaning at least every 3 months.
• If the vacuum cleaner is blocked, switch off and unplug before removing the blockage.
• When using the accessories always make sure the brushbar is switched to the off position.
IMPORTANT: The base of the vacuum cleaner should always be positioned flat on the floor when starting and in use.
The dirt container should be locked into place before lifting the vacuum cleaner by the carry handle.