Vax C86-AW Let's Get Started - page 5
Lift dirt container release
handle. The dirt bin lid
will ‘pop up’. Remove dirt
container.
Emptying and cleaning the dirt container
Using your machine
Hold dirt container over a bin
and press dirt release clip on
the bottom of the dirt container,
allowing dirt and debris to fall out.
Twist separator anti-clockwise, pull to remove.
Cleaning the shroud
Tap the shroud over a bin
to remove dirt and debris.
TIP
Don’t over fill the dirt
container to avoid blocking
the air flow through the
vacuum cleaner
Unwind the power cord.
Do not pull further than
the yellow marker.
Plug into mains and press
the on/off button to switch
the machine on.
For use on carpets click
rocker switch forward.
For use on hard floors
click rocker switch back.
Slide vent cover on hose
grip open to reduce
suction if required.
Taking care of your machine
How to use
When unwinding the power
cord always pull out to the
yellow marker but no further
WARNING
The tool connector must be fitted on the hose
when using the TurboTool (some models only).
Using accessories
Raise brushes for carpets.
Lower brushes for
hard floors.
Choose an accessory and
push onto the telescopic
extension tube or hose.