Vax SLIMVAC VX63 User Manual

Manual is about: CORDLESS SLIMVAC BLADE PET PRO

Summary of SLIMVAC VX63

  • Page 1

    Let’s get started. Cordless slimvac with detachable handheld vx63 blade pet pro slimvac cordless.

  • Page 2

    Let’s talk safety basic safety precautions this vacuum cleaner is intended for household use only and not for commercial or industrial use. Read all the instructions before using this appliance • it is a battery-operated appliance, the battery being charged whilst inside the appliance. • only use th...

  • Page 3

    Let’s talk safety don’ts do’s • do not pull or carry by charger cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not place product on cord. Do not run appliance on cord. • don’t handle the charger plug or use the vacuum cleaner with wet hands. • don’t ...

  • Page 4

    Thank you for buying this vax cordless blade. Taking care of your carpets and hard floors the vax cordless blade series is designed to make vacuuming carpets and hard floors regularly, as effective and efficient as possible and this user guide will help you get the most out of your machine. Maintain...

  • Page 5

    Getting to know your machine getting started assembling your upright slim vacuum cleaner line up the connector on the reach wand with the powered head. Push the reach wand down onto the powered head until it clicks into place. Push the handheld down onto the reach wand until it clicks into place. Th...

  • Page 6

    Getting started fixing the wall bracket please read ‘let’s talk safety’ before use caution: the battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble or heat above manufacturer’s maximum temperature limit (60°c/140°f) or incinerate. Use of another ...

  • Page 7

    Using your machine charging the battery warning: do not use the vacuum cleaner when the machine is plugged in and charging. Note: once the battery is fully depleted the vacuum will still turn on for a few seconds. Plug in the charger until fully charged. The machine can remain on the battery charger...

  • Page 8

    Caution: always take extra care when using the vacuum cleaner on the stairs. Using your machine using as a handheld vacuum cleaner using your machine using as a reach stick vacuum cleaner press the powered head/ accessory release clip and pull to remove the powered head from the reach wand. Choose a...

  • Page 9

    Taking care of your machine taking care of your machine cleaning the filter and separator reassemble filter and separator emptying and cleaning the dirt container press the handheld release clip. Pull to separate the handheld from the reach wand. The reach wand when attached to the powered head/acce...

  • Page 10

    Important: if the brushbar has been obstructed, the motor protection sensor may have been activated and the brushbar will seize. Remove the powered head from the machine and clear any obstruction. Refit the powered head, switch on the vacuum cleaner by pressing the trigger and press the brushbar on/...

  • Page 11

    * calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling. Getting in touch solution problem • check the contents panel on the box to make sure the part is included with your vacuum cleaner. There is an accessory mis...

  • Page 12

    Notes notes.

  • Page 13

    Distributed by techtronic industries australia pty. Ltd. 31 gilby road, mt waverley, vic 3149 australia. Careline au: 1300 361 505 www.Vax.Com.Au careline nz: 0800 800 900 www.Vax.Co.Nz.