Vax V-020 PU Instruction manual

Summary of V-020 PU

  • Page 1

    Www.Vax.Co.Uk please read carefully before using this cleaner. Always fully extend the mains cable before use. Retain for future reference. Vax careline 0870 6061248 in st ru ct io n m a n u a l carpet washer vax model number: v-020 pu vax v-020pu user guide v2.Qxd:vax v-020(pu) user guide 17/6/08 1...

  • Page 2

    1. Diagram www.Vax.Co.Uk 2 parts overview a a a a n t i a l l e r g e n a d d i t i v e 1 power button (red) 2 water pump button (green) 3 carry handle 4 power cord 5 container release clips 6 casters 7 hose connection port 8 solution tube port 9 exhaust filter 10 hose 11 hose cylinder connector 12 ...

  • Page 3

    3 vax careline 0870 606 1248 safety information 2. Safety information for household use only when using the carpet washer, basic safety precautions should always be observed, including the following: 1. Do not leave the carpet washer unattended when plugged in. Unplug it from socket when not in use....

  • Page 4

    Www.Vax.Co.Uk 4 preparing the carpet / pre-treating the carpet 3. Preparing the carpet important: do not use the carpet washer as a dry vacuum. 1. Vacuum carpet thoroughly. Use a vacuum cleaner with a revolving brushbar for best results. 2. Remove as much furniture from the room as possible. If unab...

  • Page 5

    Replace clean water tank (a) inside dirty water tank (b) taking care to ensure that the space to allow the dirty water back into the tank is lined up with the solution port (c) (fig.4/4). Replace motor container (a) ensuring that the solution pump hose (b) is aligned with the hole in the clean water...

  • Page 6

    Www.Vax.Co.Uk 6 assembly 5. Assembly push solution tube cylinder connector (a) firmly into solution port (a1). Twist solution tube cylinder connector (a1) a quarter turn to the right to lock into place (fig.5/1). Push hose cylinder connector (b) firmly into hose connection port (b1). Twist to the ri...

  • Page 7

    7 vax careline 0870 606 1248 usage/ troubleshooting / service / specification 6. Usage plug in machine to power supply. Press the red button to turn on the power. Press the green button to activate the pump. On the fibreflow wash head ensure that the rocker switch (a) is towards the back of the head...

  • Page 8

    Eec statement of compliance manufacturer/eec importer: vax limited, hereby on our own responsibility, declare that the v-020pu carpet washer is manufactured in compliance with the following directives: safety: 2006/95/ec low voltage directive emc: 2004/108/ec electromagnetic compatibility directive ...