Vax V-020/V-020TF Instruction manual - 6. Usage
2.
Push Hose Cylinder Connector (B) firmly into
Hose Connection Port (B1). Twist to the right until
Hose Cylinder Connector locks into place
(Fig.5/2).
3.
Push one end of the telescopic tube into the
handle of the hose (Fig.5/3).
4.
Wrap Solution Tube (A) around Hose (B). Ensure
that the solution tube is wrapped loosely enough
to allow the solution to flow freely through the
tube (Fig.5/4).
5.
After wrapping the tube around the hose, affix
Solution Tube (A) to Hose (B) using Clips provided
(C) to hold it in place (Fig.5/5).
6.
Push the other end of the telescopic tube into the
wash head to be used and push the end of the
solution tube onto the connective valve on the
Wash Head / Upholstery Tool (Fig.5/6).
6. Usage
1.
Plug in machine to power supply.
2.
Press the red button to turn on the power.
3.
Press the green button to activate the pump.
Washing and Drying Carpets
1.
On the Fibreflow wash head ensure that the
rocker switch (A) is towards the back of the head
to allow water to flow through the head (Fig.6/1).
Assembly / Usage
5
Fig.5/3
Fig.5/4
A
B
Fig.5/2
Fig.5/6
B1
B
Fig.5/5
A
B
C
Fig.6/1
A
V-020(TF) User Guide.qxd 4/9/06 14:43 Page 6