Vax VCAPH1500 User manual - page 9
Vax Service line:
AU: 1300 361 505
NZ: 0800 800 900
vax.com.au
8
Maintenance
(Keep your Vax as good as new)
Clearing blockages
Removing blockages from the TurboTool
Removing blockages from the Powerhead
WARNING: To reduce the risk of personal injury, unplug the vacuum cleaner before performing
maintenance/troubleshooting checks. Disconnect the hose from the vacuum cleaner and remove any
blockages found then reconnect the hose securely.
Hose blockages
The flexible hose may be disconnected from the
vacuum cleaner. Carefully remove any blockages
found and reconnect the hose securely.
Accessory blockages
Remove accessory from the hose/telescopic tube.
Carefully remove the blockage and return
to the cleaner.
Press the two side buttons together
& pull sides apart.
NOTE: Switch the cleaner off and disconnect the power plug from the electrical outlet.
Open clips at either side of the
Powerhead.
Carefully use scissors to cut out
the blockage.
Lift top up to reveal brushbar.
Realign turbo brush sides
& press together.
Cut away tangled hairs with a pair
of scissors. Be careful not to cut the
bristles on the brush bar.