Vax VX42 User Manual - Taking Care of Your Machine
Cleaning the filter
Press the handheld release
button. Lift to remove the
handheld from the main body.
Pull foam filter from
underneath of filter frame.
Wash foam filter under
running water (max 40’C).
Do not use detergent.
Press the dirt container
release button to remove
the dirt container.
Squeeze tabs to remove filter,
filter frame and separator.
Tap filter, filter frame and
separator over a bin to remove
any dirt and debris. Do not
wash filter frame or separator.
Taking care of your machine
CAUTION:
Always switch off the vacuum cleaner before carrying out any maintenance or troubleshooting.
Do not use your vacuum cleaner without the filters in place.
24hr
Leave for at least 24 hours or
until fully dry before replacing
into the machine.
TIP
For best cleaning
result filters require
cleaning every 4-6
uses or as needed.