Vax VX42 User Manual - Caution

Manual is about: DynamoPower Coldless

Page of 16

Download

Print this page

Bookmark us

Cleaning the terminals

CAUTION:

Always switch off the vacuum cleaner before carrying out any maintenance or troubleshooting.

Do not use your vacuum cleaner without the filters in place.

Clearing blockages

Battery Maintenance

Press the handheld

release button. Lift to

remove the handheld

from the main body.

Press the floorhead

release button and pull

floorhead to remove.

Remove any blockage

from the main body.

Taking care of your machine/Let’s talk technical

Using a dry cloth or soft dusting brush remove any dust or debris from terminals in vacuum, on handheld

and on docking station.

• Never short-circuit the battery, i.e. never touch both poles simultaneously, especially with metal objects.

• Never dismantle the battery.

• Never expose the battery to high temperatures.

• Improper handling can lead to liquid leaking from the battery. This can cause skin irritations. Avoid any contact

with the fluid.

• Do not replace the battery with a battery of a different type.

• If it becomes necessary to replace the battery, contact the Vax Careline on AU: 1300 361 505 / NZ: 0800 800 900

to determine the location of your nearest authorised service agent.

For best performance terminals in vacuum, on handheld

and on docking station must be free from dust and dirt.

CAUTION

« ‹ Prev 9 10 11 12 13 14 15 Next › »

Summary of VX42

Page 1
Vx42 let’s get started. Grab & go cordless convenience for quick clean-ups!.
Page 2: Let’S Talk Safety
Let’s talk safety basic safety precautions don’ts 8 do not pull or carry by charger cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not place product on cord. Do not run appliance on cord. 8 don’t handle the charger plug or use the vacuum cleaner with...
Page 3
3 always make sure the filter and dirt container are fitted correctly before using your vacuum cleaner. 3 turn off all controls on the vacuum cleaner before disconnecting or connecting to charger. 3 always turn off and disconnect from charger before carrying out any maintenance. 3 take extra care wh...
Page 4: We’Re Here If You Need Us
Thank you for buying this dynamo power. Taking care of your carpets and hard floors the dynamo power is designed to make vacuuming carpets and hard floors regularly, as effective and efficient as possible and this user guide will help you get the most out of your machine. Maintaining your carpets an...
Page 5: Contents
Contents dynamo power let’s talk safety getting to know your machine getting started using your machine taking care of your machine let’s talk technical accessories what to do if it goes wrong getting in touch included with your machine 2-in-1 tool charger screw (for attaching handle to vacuum clean...
Page 6
Getting to know your machine name dynamo power 25.2v model no vx42 battery voltage 25.2v run time 55 minutes * charge time 5 hours weight 3.29kg dust bin capacity 0.5l technical specification subject to technical change without notice. * low speed setting on hard floors. Images are illustrative only...
Page 7: Getting Started
Getting started assembling your 2-in-1 vacuum cleaner line up floorhead with main body, push firmly into place. Line up handle with main body and lower into place. Insert screw into back of the handle and tighten with a cross head screwdriver until handle is secured into place. Please read ‘let’s ta...
Page 8: Using Your Machine
Using your machine using your machine unplug the charger from the mains and remove the vacuum from the docking station. Place foot on the floorhead and pull the handle backwards to recline the machine. Press the on button on the handle to turn the machine on. Note: do not use brushbar on hard floors...
Page 9: Using Your Machine
Using your machine press the handheld release button. Lift to remove the handheld from the main body. Press the on/off button to switch the handheld on. Press the on/off button to switch the handheld off. Pull and remove the 2-in-1 tool and connector from the nozzle. Line up and return handheld into...
Page 10: Taking Care of Your Machine
Taking care of your machine press the handheld release button. Lift to remove the handheld from the main body. Emptying the dirt container press the dirt container release button to remove the dirt container. Squeeze tabs to remove filter, filter frame and separator. Hold dirt container over a bin a...
Page 11: Taking Care of Your Machine
Cleaning the filter press the handheld release button. Lift to remove the handheld from the main body. Pull foam filter from underneath of filter frame. Wash foam filter under running water (max 40’c). Do not use detergent. Press the dirt container release button to remove the dirt container. Squeez...
Page 12: Caution
Cleaning the terminals caution: always switch off the vacuum cleaner before carrying out any maintenance or troubleshooting. Do not use your vacuum cleaner without the filters in place. Clearing blockages battery maintenance press the handheld release button. Lift to remove the handheld from the mai...
Page 13
Cleaning blockage for the brushbar using a pair of scissors remove any threads or hair caught around the brushbar. If the brushbar has been obstructed, the motor protection sensor may have been activated. Clear any obstruction from the brushbar, stand the machine onto the docking station and wait 30...
Page 14: What To Do If It Goes Wrong
• check the machine is fully charged. Go to ‘using your machine’. • check the charger is plugged into the mains and correctly connected to the docking station. Go to ‘getting started’. • check the handheld has been correctly fitted into the main body. • check terminals on vacuum, handheld and dockin...
Page 15: Getting In Touch
* calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling. Getting in touch.
Page 16
Distributed by techtronic industries australia pty. Ltd. 31 gilby road, mt waverley, vic 3149 australia. Careline au: 1300 361 505 www.Vax.Com.Au careline nz: 0800 800 900 www.Vax.Co.Nz.