Vax W86-DP-R Let's Get Started - page 3
3
Check with the manufacturer of
your flooring prior to using the
carpet washer.
3
The clean water tank should only be
filled with warm water (max 40’C).
Filling the clean water tank with hot or
boiling water may damage your machine
and invalidate your guarantee.
3
Store your carpet washer in a cool, dry
area. Before storing your carpet washer
please ensure all water/solutions tanks
and filters are thoroughly clean and dry.
3
Always vacuum your carpets thoroughly
before using your
carpet washer.
3
Always unplug the carpet washer before
carrying out any maintenance and
before connecting or disconnecting the
hose/accessories.
3
Turn off all controls on the carpet
washer before disconnecting or
connecting the power cord, after use
always wrap the power cord around the
cord clips provided.
3
Always replace the fuse in the plug with
a 13amp fuse. Always protect the power
cable from heated surfaces or near
open flames.
3
Always keep the power cord away
from the brushes whilst using your
carpet washer.
3
Use only CE approved 13amp extension
cords, non-approved extension cords
may overheat. Care should be taken to
arrange the extension cord as it can be
a trip hazard.
3
Take extra care when cleaning on
the stairs.
3
Always use the carpet washer with all
water/solution tanks and filters in place.
3
Keep all openings clear and free
from debris as this may affect the
airflow/suction.
3
Always use the carpet washer in an
upright position. To prevent motor
damage from dirty water, never hold
the carpet washer upside down or lay
on its side.
Do’s
8
Don’t over saturate your carpet.
8
Don’t use the carpet washer with
incorrect voltage as this may result
in damage or injury to the user. The
correct voltage is listed on the
ratings label.