Vbox Communications Cat's Eye USB 3560 Installation Manual - page 21
17
3. Check that your system complies with the minimum requirements for operating the
Cat’s Eye
USB 3560 Tuner. To check your system configuration, proceed as follows:
a. Press Start and select “Run”. The Run window appears
b. Type “DXDIAG” and click OK. A dialog box displays on screen,
asking you to confirm whether you wish the program to check for
WHQL digital signatures. Click Yes. The DirectX Diagnostic Tool
window appears. The program starts checking your computer. A
progress indicator on the lower left-hand section of the window lets
you monitor the operation.
Figure 11: System Configuration Diagnostics
c. At completion of the diagnostics operation, the progress indicator
disappears. The DirectX Diagnostic Tool window shows your
computer’s system data. Press the Save All Information button to
generate a text file with the information. A message indicates that the
program is collecting information for saving.
d. Upon finishing colleting information, the Save As window displays on
the screen. Choose a known location in your computer to save the file
and press Save. The Save As window disappears and you return to
the DirectX Diagnostic Tool window. Press Exit to close this window.
e. Check the file and verify that your computer fulfills all minimum
requirement for the operation of the
Cat’s Eye
USB 3560 HDTV tuner.
In case you wish to consult with VBox Communications Ltd., please e-
mail this file to the Support department together with your query.