VDG KVWALL-24B Owner's Manual

Manual is about: ELECTRIC FLAT PANEL FIREPLACE HEATER

Summary of KVWALL-24B

  • Page 1

    Electric flat panel fireplace heater owners manual model numbers: kvwall-24b; ws-g-03-2 mini only use this heater as described in this manual. Any other use is not recommended by the manufacturer, and may cause fire, electric shock, or other personal injury. Warning! Read and understand this entire ...

  • Page 2: Warning

    2 important safety information! Warning always keep electric cords, home furnishings, drapes, clothing, papers, or other combustibles at least 3 feet (0.9m) away from the front of this heater, and away from the bottom, sides, and rear of this heater. Do not place the heater near a bed because object...

  • Page 3: Warning

    3 warning risk of electric shock! Do not open! No user-serviceable parts inside! Always disconnect this unit from the power supply before performing any assembly or cleaning, before replacing the light bulb, or before relocating the electric fireplace. Never use this heater in bathrooms, laundry roo...

  • Page 4: Preparation

    4 preparation this product includes a glass panel! Always use extreme caution when handling glass. Failure to do so could result in personal injury or property damage. Remove all parts and hardware from the carton and place them on a clean, soft, dry surface. Parts and assembly steps are grouped for...

  • Page 5: Notice

    5 notice the wall mount fasteners included with this fireplace are for use only with a wood-framed wall covered in drywall (sheet rock). For concrete walls, cinder blocks, or other wall types, consult a professional for the best attachment methods. Always unplug this fireplace heater before assembly...

  • Page 6

    6 step 4. Align the holes in the wall bracket (e) with the pilot holes and drywall anchors. Thread three wood screws (b) through the holes in the wall bracket and directly into the wall studs and drywall anchor(s). Make sure the bracket is level. Tighten all screws securely with a screwdriver. Alway...

  • Page 7: Operation

    7 operation read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could result in electric shock, fire, serious injury, or death. Power make sure the on/off switch, located on the left side panel, is in the off po...

  • Page 8: Control Panel Operation

    8 control panel operation button action and indication control panel on off 1. Press on (l). Power turns on. All functions are enabled. 2. Press off (o). Power, flame effect, and all functions turn off. Power 1. Press once. Flame effect and indicator turn on. 2. Press again. Power and all functions ...

  • Page 9: Remote Control

    9 remote control (control panel power switch must be on to use remote control.) button action and indication remote control power 1. Press once. Flame effect turns on high and indicator light turns on. 2. Press again. Power and all functions turn off. Heater 1. Press once. Small indicator lights up....

  • Page 10: Remote Control Information

    10 remote control information note: this equipment has been tested and found to comply with the limits for class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipme...

  • Page 11: Replacing The Light Bulb

    11 plastic: • wipe gently with a slightly damp cloth and a mild solution of dish soap and warm water. • never use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface. Replacing the light bulb always turn the heater off and unplug the power cord from the outlet before cha...

  • Page 12: Limited Warranty

    12 limited warranty manufacturer warrants this product for replacement or repair of parts to the original purchaser for a period of 1 (one) year from the original date of purchase. The original dated sales receipt is required for all warranty claims. This limited warranty does not cover replacement ...