VDG KVWALL-24B Owner's Manual - Replacing The Light Bulb
11
Plastic:
•
Wipe gently with a slightly damp cloth and a mild solution of dish soap and warm water.
•
NEVER use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.
Replacing the light bulb
ALWAYS turn the heater OFF and unplug the power cord from the outlet before
changing the bulb. Failure to do so could result in
electric shock, or personal injury.
1. Allow the fireplace to cool down before moving it. 2. Lay the fireplace down on a soft surface.
3. Unscrew the two bulb plate screws and remove the bulb plate. 4. Carefully unscrew the light bulb
and replace it with another 40W candelabra style light bulb of the same design.
5. Replace the bulb
plate and secure it in place with the two screws. Note: Do not over-tighten the screws.
WARNING! Other than replacing the light bulb, NO SERVICING of the internal or
electrical parts should be performed by the consumer. Do not service the unit yourself.
Maintenance
Risk of electric shock! DO NOT OPEN any panels other than the bulb replacement
plate! No user-serviceable parts inside!
ALWAYS turn the heater OFF and unplug the power cord from the outlet before
cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in
electric shock, fire, or personal injury.
Electrical and Moving Parts:
•
The fan motors are lubricated at the factory and will not require lubrication.
•
Electrical components are integrated in the fireplace and are not serviceable by the consumer.
Storage:
•
Store heater in a clean dry place when not in use.