I n s t r u c t i o n m a n u a l / b e d i e n u n g s a n l e i t u n g / m a n u e l d ´ i n s ta l l at i o n e t d ´ u t i l i s at i o n / h a n d l e i d i n g / m a n u a l e d ´ i n s ta l l a z i o n e e f u n z i o n a m e n t o i n s t r u k c j a o b s l u g i l i c z n i k a / i n s ta...
My settings ✍ age: weight: limit 1: low: high: limit 2: low: high: limit 3: low: high: recovery pulse: recovery time: bike 1 weight: bike 2 weight: bike 2 wheelsize: bike 1 wheelsize: home altitude: bike 1 service intervall: bike 2 service intervall: max heartrate: further settings:.
Picturebook * watch out: old batteries require special disposal please read instructions for end-off-life disposal treatment p01 8x * cd-rom pc-sport only for models z2 pc-link / z3 pc-link.
Picturebook picturebook open close open close ! Open close ! P02.
Picturebook open close ! P03 only for models z2/z2 pc-link z3/z3 pc-link.
Picturebook 90° p04/05.
Picturebook p06 unlock lock 1.Lock 2.Click 2.Unlock.
Picturebook p07 1-5 mm.
Picturebook p08 only for models z2/z2 pc-link z3/z3 pc-link.
Picturebook open close p09 p09-2.
Picturebook ws in mm / inch 1x tire size ws in mm kmh ws in inch mph 47-305 16x1,75 1272 50,1 47-406 20x1,75 1590 62,6 34-540 24x1 3/8 1948 76,7 47-507 24x1,75 1907 75,1 23-571 26x1 1973 77,7 40-559 26x1,5 2026 79,8 44-559 26x1,6 2051 80,7 47-559 26x1,75 2055 80,9 50-559 26x1,9 2060 81,1 n/a 26 x 1,...
Picturebook p11 only for models z2 pc-link z3 pc-link.
4 en congratulations with your selection of a vdo z2 you have opted for high-quality sports information computer. In order to fully benefit from the potential of the computer, we recommend that you carefully read this manual. It contains all operating instructions and many useful tips. We extend our...
5 instruction manual table of contents 1.1. General 1.2. Important instructions for the digital wireless system 1.3. Control system - operation 1.3.1. Operating mode 1.3.2. Setting mode 1.4. The display 1.5. Extension options & accessories 2. Installation 2.1. Battery installation 2.1.1. Battery ins...
6 en 8. Reset mode 8.1. Resetting trip data 8.2. Reset total ride time 8.3. Resetting the total distance meter 8.4. Resetting the navigator 8.5. Resetting to factory settings (ac button) 9. Operation mode selection selecting the operation mode: bike mode or walk mode 10. Operation mode 10.1. Functio...
7 instruction manual 1.1. General 1.2 important instructions for the digital wireless system your vdo z2 works entirely without cable; it works with triple digital wireless transmission based on well-established ant+sport® wireless protocol. The ant+sport® wireless protocol has already been success-...
8 en k 1.3.1. Operation mode - use this mode to display all information button assignment is shown on the housing. Operation mode z2 trip dist ride time avg speed max speed cad avg cad max clock navigator odo bike 1 odo bike 2 odototal time bike1 time bike2 totaltime timer avg pulse max pulse pulse ...
9 instruction manual 1.3.2. Setting mode - use this mode to make all settings. The assignment of buttons is on the buttons to go to setting mode: press button ç for 3 seconds setting mode z2 or chap. 6.1. Chap. 9. Chap. 5.4. Chap. 3.3. Language select navigator set wheelsize set wheelsize change clo...
10 en 1.4. The display the display of your vdo computer is comprised of three large areas. The following information is displayed in operation mode: 3. Footer: dot matrix full-text - display of the selected/displayed function - in setting mode menu prompting (chapter 5-10) provides informa- tion abo...
11 instruction manual 1.5. Extension options & accessories extension option: you have the possibility of extending your computer with the cadence extension set in this case the following cadence functions are available to you: actual cadence average cadence maximum cadence in addition you can also g...
12 en 2, and the altitude difference walked. Reprogram this information after inserting the new batteries. 2.1.2 battery installation pulse-chest belt >>> p03 your vdo is shipped with the battery installed in the pulse-chest belt. Proceed as follows when later inserting a replacement battery: step 1...
13 instruction manual 2.3. Putting on the pulse-chest belt >>> p08 step 1 first connect the one side of the pulse transmitter with the elastic strap, as shown. Press the ends of the pulse-chest belt into the plastic holder of the elastic strap step 2 place the pulse transmitter just below your chest...
14 en ensure that the electrodes of the pulse transmitter belt are wet, or that the distance between the magnets and the speed/cadence transmitter is not greater than 5 mm. Attention: your computer can save the codes of up to 5 transmitters 1. Speed transmitter of bike 1 2. Speed transmitter of bike...
15 instruction manual important note / re-open of transmitter search for the receive channel after interruption if no signal is received from an already paired transmitter after 15 minutes (for example riding without chest belt for z2 and z3, also pc-link models), the receive channel will be closed ...
16 en 5. Bicycle function settings 5.1. Measuring and setting wheel size/s in order for your vdo computer to measure correctly you must first measure the circumference of your wheel. If this value is set incorrectly then all values calculated on the basis of this value, such as speed, trip, etc. Wil...
17 instruction manual ‚ ∂ ƒ changing the wheel size ‚ wheelsize set done automatic return to trip dist wheel size set done display of the actual wheel size in the center bar of the display, right bottom (1 or 2) 5.3. Setting total kilometers you can program the total distances into your vdo computer...
18 en 6. Personal settings (your data) important note: the personal settings are the prerequisite for calcu- lating maximum pulse, training zones, and calorie consumption. Ensure that you make the personal settings first so that you can fully utilize the possibilities offered by the computer. Your p...
19 instruction manual pulse max calc done ‚ person data ?Set ok? ‚ person data set done automatic return to operation mode for the selected timer. Set hf max manually done. 7.Pulse function settings the pulse functions of your vdo computer are based on the specifica- tion of three training programs ...
20 en ‚ limit x set done (x = selected training range 1, 2, or 3) automatic return to the selected timer. 7.3. Select training program 3 sec. ç setting mode language select ∂ ƒ pulse limit settings ‚ pulse limit ?Set? ∂ pulse limit ?Select? ‚ limit 1 ?Select? Or ∂ limit 2 ?Select? Or ∂ limit 3 ?Sele...
21 instruction manual 8. Reset mode in reset mode of your vdo computer you reset the saved ride data of the bicycle computer. You can also reset the computer to the factory settings 8.1 trip data attention: when resetting the trip data the following day trip data will be deleted: - daily distance - ...
22 en 8.5. Resetting to factory settings warning: when resetting to factory settings all ride data and all com- puter settings will be reset, including the personal data. Only perform this reset if a software malfunction occurs or if your computer can no longer be operated. Step 1 use a sharp pencil...
23 instruction manual - actual speed: maximum value 120 km/h or mph (! Not in walk mode !) - comparison of actual speed to average speed = above, =below (! Not in walk mode !) - selected wheel size 1 or 2 footer - shows selected information and corresponding value bicycle functions (button ç ) with ...
24 en option only with cadence extension 10.T1. ¬ cad avg = average cadence of the actual trip display ç cad avg reset: 3 sec. √ trip data ?Reset? ‚ trip data ?Reset? >> flashing ‚ trip data reset done l automatic return to operation mode for trip dist 10.T2. ¬ cad max = maximum cadence of the actua...
25 instruction manual 10.3.11. ¬ time bike 2 = total ride time bike 2 shows the total time of all day trips ridden with bike 2 in hhh:mm display √ time bike 2 maximum value 999:59 hhh:mm 10.3.12. ¬ total time = total ride time bike 1 and bike 2 shows the total time of all day trips ridden with bike ...
26 en 10.3.16. ¬ £ lap-timer = lap timer prerequisite: only after selection of lap timer, chapter 12.1. Display ≈ start measuring ∫ press go to next lap ¥ + ≈ press buttons at the same time end/pause measurement ∫ press display lap data ≈ lap rec ∫ go to the next lap data reset: ∫ press button for 4...
27 instruction manual 11. Riding with the navigator with the vdo navigator you can complete trips according to roadbooks (e.G. Moser guide). Roadbooks are offered by many publishing houses for fantastic trips (for road bikes as well as mountain bikes) by many publishing houses. Taking a specified tr...
28 en timer 1: you can program a time e.G. For interval training. Timer 1 counts from zero forward. At the end of timer 1 there is a single beep. Timer 1 only functions if you have set a time. If you have forgotten to set a time your vdo computer displays timer error timer 2: you can program a time,...
29 instruction manual ‚ timer ?Select? ∂ timer ?Set? ‚ timer 1 ?Set? ∂ timer 2 ?Set? Select ‚ timer ?Set? ‚ set hour ?Continue? ∂ ƒ setting hours (keep button depressed for fast run- through) ‚ set minutes ?Continue? ∂ ƒ setting minutes (keep button depressed for fast run- through) ‚ set seconds ?Co...
30 en 12.5. Lap-timer the lap timer must first be started with the ∫ button. To save the lap data press buttons ≈ + ¥ at the same time on the desired points of the training unit. In this process the following values will be saved: - duration of the lap - average heart rate on the lap - average speed...
31 instruction manual tip: at the end of the training unit measure the recovery time or the recovery pulse to determine your training status. See 7.4. Recovery time and recovery pulse note: all bicycle altitude and pulse function can also be called up during timer operation via the ç √ ¥ ≈ buttons. ...
32 en 13.3. Training with the countdown timer: the countdown timer is a programmable timer with reverse counting. This is particularly well-suited for use in time trials. At the end of the countdown time there is a single beep. Important: during countdown operation the residence periods of the pulse...
33 instruction manual display in recall mode after concluding the measurement. 2. If the lap timer is running the residence period of the pulse frequency in the selected training ranges is recorded (compare 12.1) step 1 preparing the recording: - set the training ranges automatically chapter 7.1, or...
34 en 14. Sleep mode your vdo computer has a two-stage sleep mode. Sleep mode is activa- ted automatically if the computer no longer receives data. Phase 1 after 5 minutes: - the display goes into sleep mode now the display shows time, date, and day of the week. For wake up press any button. Descrip...
35 instruction manual no speed display - check the magnet position (distance between magnet and transmitter, position of the magnet to the transmitter point on the transmitter) - check the battery in the transmitter - check the battery in the computer (if battery voltage is insufficient then the rec...
36 en no pulse percentage of the personal maximum pulse personal data has not been set, timer has not been started no data relative to training times is in the set training ranges timer has not been started. Start timer calorie display does not function personal data has not been set, timer has not ...
37 instruction manual 17. Technical specifications computer: approximately 49.6 x 46.6 x 16.5 mm, weight: approximately 45 g handlebar holder: weight approximately 15 g speed transmitter: weight approximately 20 g pulse transmitter: weight approximately 80 g battery: 3v, type 2032 (computer); type 2...
#56'.'%64+%#..'%6410+%37+2/'06 22.+%#$.'+06*'7412'#00+10#0&16*'47412'#0%17064+'59+6*5'2#4#6'%1..'%6+105;56'/5*+5/#4-+0)5*190106*' 241&7%614+65.+6'4#674'+0&+%#6'56*#6+65*17.&016$'&+5215'&9+6*16*'4*175'*1.&9#56'5#66*''0&1(+65914-+0).+(' 124'8'062155+$.'*#4/616*''08+410/'0614*7/#0*'#.6*(41/70%10641..'&...
24' #4%#,'.'&'2'#%'56241&755#7/'0g+10#6'o0+05647%g+70+.'5#.'&'(1.15+4'+0&+%i(#267.%i241&757.0764'$7+'#470%#6 o/24'70i%7#.6'4' &i70i61#4'#5724#/'&+7.7+o0%10,74i6145#7#5i0i6ig++1#/'0+.14ɦ#6''8#%7i4++0'%10641.#6'#4' 5'2#4#g+#%'56241&75&'#.6'6+274+&'4' 6+.+ #24+/++0(14/#g++%724+8+4'.#.1%7.H+/1&7.O0%#4'2...
4+=76+'.'664+%+'&'.'66410+%+ 22.+%#$+.'+0+2#'5+&'.."0+10'7412'#'+037'..+%105+56'/#&+4#%%1.6#&+(('4'0 57#&1%7/'06# '8+6#4''8'067#.++#.."#/$+'06'1#..#5#.76'%#75#6+.."+01221467015/#.6+/'061&'+4+=76+5++08+6#."76'06'#5'2#4#4' 37'561241&1661#.64+6+2+&+4+=76+'&+4+%+%.#4.1+0/#0+'4#4'52105#$+.'2'4(#814+4'+.4...
% ', '.'-64+.+56',#'.'-64110+.+56'5'#&/'6',ff6/'& '..+0'6f*+56756116'.8t+5'..'&1-7/'06+&'.0f+6#$'6611&'6'+61*+-#57675#,#.T22'/+5'.-t48#.-115/77&'1./',ff6 /'6')#'..'-5'68f.6+,ff6/'6'-10641..+/#67-t48#./+5')#5'167&8t+/#.+-7-#*,76'-+6#/+56-'5--100#.'8t++0+/'56' 6'48+5'.'0+0)'&'0/#6'4+##.5'6'8#*'0&+6'5f...
#11# 0-01.+'616#5'.'-64+5-c570'.'-6410+5-c5+'4b%'5 #6-4+67/+'/2`%6c'-52.7#6c%+,#5.#+-##+0'8`45678+&'+70%+.8`-78'5'.B$#++'52`,#/1-#+6`,7/7-#5+45#+56b65#4 0'-10641.`,#/7#6-4+67/7.+-8+&`u#076#5,c01ua+401%+6+'/#6-4+67/+'/70,c2c4564c&c.#+5'-/`67/#6'4+c.14'57457 #6$+.&b)7#6-c46167.+'61u#07c,5#+/0+'%b$#5.+...
)('5n&71&'37+2#/'0615.K%64+%15'.'%64q0+%15 56#/#4%##24'5'06#ә&761170#57#.+6'4#674#+0&+%#37''.'0i1&'8'4d5'4'.+/+0#&1,706#/'06'%1/154'5n&715 &1/k56+%15+0&+('4'0%+#&1501=0#.&15'72'4n1&1&'8+v6+.#4#+/2'&+4#1#/$+'06''g5#v&'*7/#0#%#75#&15 2'.#'.+/+0#ji1+0%10641.#&'4'5n&715&'8'4d5'2#4#4'56''37+2#/'061&'1764...
# #1&2#&0#'.'-64+u0#+0'.'-64105-#124'/# 1&564#0,'8#0,#1&2#&-18+ 21018017214#$1/#6'4+#.0+*8+418214#$0+-+8)1521&+0,568+*0#, 1-1.,78#4014'%+-.+4#0,'21-.+u',164)18+01-,'451+ 21)1,'0#$#80'21)1&$'')#+ .&4'#.#/*'+%64'#%*#)75'+%64'10#%*4#/*#n1.# k+4n100#0/*#4%d+.5'1#6d#4#06d+4)'0q5#.+64n1%*6#6*#)#00.'+50d4%...
D eu-konformitätserklärung wir, cycle parts gmbh, grosse ahlmuehle 33, d-76865 rohrbach erklären, dass die vdo fahrradcompu- ter mit funkübertragung vdo z1, z2, z3, z2 pc-link, z3 pc-link und alle sender z-cad, z-pulse, z-sender, dockingstation bei bestimmungsgemäßer verwendung den grundlegenden anf...
66023 66023 addendum to user manual usa cdn notice: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa...
6604 6604 addendum to user manual usa cdn notice: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installati...
F o r r u n n i n g / h i k i n g v d o s e r i e s - z w w w. V d o c y c l e c o m p u t i n g . C o m cyclecomputing.