VDO Radio Module RM 8204 Installation And Owner's Manual - Setup Menu
SETUP menu
The SETUP menu offers a wide range of settings for matching the RM 8204 to the cur-
rent system configuration.
☞
Select “SETUP” in the main menu to open the SETUP sub-menu.
☞
Use the
8 and 2 cursor buttons to select the desired menu item.
☞
Press OK to confirm your selection.
☞
To exit the menu, select “ESC” or press the ESC button.
The following settings are available in the SETUP menu:
AUX input activation / deactivation
☞
Select “AUXILIARY”.
☞
Press OK to confirm your selection.
☞
Use the
8 or 2 cursor button (ON or OFF) to activate / deactivate the AUX input.
Traffic announcement volume
☞
Select “TA VOLUME”.
☞
Press OK to confirm your selection.
☞
Set the desired announcement volume with the cursor buttons
8 or 2.
✎
The volume adjustment range is from 0 to +8.
Telephone input activation / deactivation
☞
Select “PHONE”.
☞
Press OK to confirm your selection.
☞
Use the
8 or 2 cursor button (ON or OFF) to activate / deactivate the telephone
input.
Telephone / mute signal matching
☞
Select “MUTE LEVEL”.
☞
Press OK to confirm your selection.
☞
Use the
8 or 2 cursor button (LOW or HIGH) to match the unit’s switching input
with the muting signal of your hands-free system.
❑
LOW: “Active low” muting signal; radio switches to mute at 0 V.
❑
HIGH: “Active high” muting signal; radio switches to mute at 12 V.
Telephone volume adjustment
☞
Select “PHONE VOL”.
☞
Press OK to confirm your selection.
☞
Using the
8 or 2 cursor button, set the desired volume for audio output of the
connected mobile handset and hands-free system.
✎
The volume adjustment range is from -30 to +30.
Operation
16