- DL manuals
- Vdwall
- Processor
- LVP605
- User Manual
Vdwall LVP605 User Manual
Summary of LVP605
Page 1
Lvp605 series led hd video processor user manual shenzhen vdwall co., ltd..
Page 2: Content
Www.Videowall.Cn 2 lvp605 series user manual content chapter 1 safety precautions....................................................................03 chapter 2 item list......................................................................................04 chapter 3 hardware connection..............
Page 3
Www.Videowall.Cn 3 lvp605 series user manual chapter 1 safety precautions danger there is high voltage in the processor, to prevent any unexpected hazard, unless you are a maintenance personnel, please do not open the cover of the device. Warning 1. This device shall not encounter water sprinkle or ...
Page 4: Chapter 2 Item List
Www.Videowall.Cn 4 lvp605 series user manual chapter 2 item list please unpack the product with care and check whether all the following items are included in the package. If anything is found missing, please contact the dealer. Standard accessories the accessories supplied with this led video proce...
Page 5
Www.Videowall.Cn 5 lvp605 series user manual chapter 3 hardware connection 3-1 rear view figure 3-1 rear view 3-2 port description 1) video input signals (input) lvp605 supports 10 video input signals as follows: port description v1~v3 3 x composite video (pal /ntsc) s-video 1 x s-video (pal/ ntsc) ...
Page 6
Www.Videowall.Cn 6 lvp605 series user manual 3) video output signals port description vga out 1 x vga (analog rgb signal output, can be connected to a monitor for monitoring; this port is highly recommended to use when operating or setting up lvp605) dvi out1 / dvi out2 2 x dvi (same content will be...
Page 7
Www.Videowall.Cn 7 lvp605 series user manual 3-3 connection diagram figure 3-2 connection diagram.
Page 8: Chapter 4 Front Panel
Www.Videowall.Cn 8 lvp605 series user manual chapter 4 front panel 4-1 front view figure 4-1 front view 1) input select buttons input select buttons (v1, v2, v3, s-video, dvi, vga1, vga2, ypbpr, ext.): select the input signal. 2) setup buttons setup button (setup,↑,↓, knob): set up output image para...
Page 9
Www.Videowall.Cn 9 lvp605 series user manual 6) pc signal bypass output information display (info): displays current settings and related information of lvp605. 7) pip / pbp button pip / pbp button (on / off,m1，m2，m3，m4): on / off: press this button to turn on/off pip/pbp function. When the indicato...
Page 10
Www.Videowall.Cn 10 lvp605 series user manual 4-2 button instructions lvp605 has 25 panel buttons and 1 knob, which are in operation mode when lvp605 starts to work. The functions of these buttons are as follows: 1) input signal select buttons description v1, v2, v3 select a composite signal from 3 ...
Page 11
Www.Videowall.Cn 11 lvp605 series user manual lvp605 supports 32-level output brightness adjustment. Adjustment range includes “0~64” and “0~100”, according to “brightness level”. The factory default of adjustment range is 0~64: 0 is the lowest value and 64 is the highest. To make sure of full grey ...
Page 12
Www.Videowall.Cn 12 lvp605 series user manual blending: the lcd screen shows that the current signal is background, when selecting another signal from a different channel, two signals will blend. Press any signal button of these two again, this signal will quit from blending and be displayed indepen...
Page 13
Www.Videowall.Cn 13 lvp605 series user manual differently. When pip mode starts to work, press a pip mode button (m1, m2, m3, m4) to select the mode accordingly. 7) full / part display (bypass) press this button to switch between full and part display. This function only works when the current selec...
Page 14: Chapter 5 Settings
Www.Videowall.Cn 14 lvp605 series user manual chapter 5 settings the following settings should be completed by professional technicians. Normal users should not try to change following settings unless they have received technical training. 3 categories of settings of lvp605 are opened to technicians...
Page 15
Www.Videowall.Cn 15 lvp605 series user manual 5-1 user settings 1. Enter settings menu enter settings: while in operation mode (make sure pip and mosaic are switched off), press “setup” and “ok” to reach the first item in settings menu. Quit settings: while in settings menu, press “setup” again to q...
Page 16
Www.Videowall.Cn 16 lvp605 series user manual functions of the knob and buttons in settings are: button function knob rotate speed step value in proportion to rotate speed. Rotate clockwise decrease value or select previous value. Rotate anticlockwise increase value or select next value. Press save ...
Page 17
Www.Videowall.Cn 17 lvp605 series user manual 3. Output image settings lvp605 can output image from the vga out and 2 dvi out ports. There are 17 output formats which can be selected in item no.2 “output format”: output format 1 1024×768_60 2 1024×768_75 3 1280×1024_60 4 1280×1024_75 5 1600×1200_60 ...
Page 18
Www.Videowall.Cn 18 lvp605 series user manual fixed edid 1024x768_60 1024×768_75 1280×1024_60 1280×1024_75 1600×1200_60 1920×1080_50 1920×1080_60 1366×768_60 1440×900_60 2048×1152_60 2560×816_60 2304×1152_60 1920×1200_60 1200×1600_60 1080×1920_60 1536×1536_60 customizable edid edid width: customizab...
Page 19
Www.Videowall.Cn 19 lvp605 series user manual item no. Item name 4 out_hori_width 5 out_hori_start 6 out_vert _height 7 out_vert_start remark: parameters can be changed by rotating the knob and the rotating speed decides the step value. When setting the parameters, the size and location of output im...
Page 20
Www.Videowall.Cn 20 lvp605 series user manual background text text overlay figure 5-3 text overlay 5. Brightness / saturation / sharpness lvp605 supports customizable brightness, saturation and sharpness: item no. Item name definition 12 brightness adjustment range includes “0~64” and “0~100”, accor...
Page 21
Www.Videowall.Cn 21 lvp605 series user manual remark: ad1 and ad2 can’t be configured to match the same input signal. 7. Hot spare lvp605 supports hot spare of input signals. When the current input signal is lost, lvp605 will switch to the spare signal automatically to avoid image interruption cause...
Page 22
Www.Videowall.Cn 22 lvp605 series user manual no.23: “adc calibration” some problems such as color cast or extreme darkness may appear when analog signals are input to a processor of which white balance is not calibrated yet. Lvp605 can automatically calibrate the white balance according to the inpu...
Page 23
Www.Videowall.Cn 23 lvp605 series user manual remark: when multiple units of lvp605 are connected in parallel, their “brightness level” should be the same, or their output brightness will be different. No.26: “video stabilization” when cvbs/s-video/hdmi/sdi is interlaced (for example: 1080i) and use...
Page 24
Www.Videowall.Cn 24 lvp605 series user manual 5-2 pip / pbp settings there are 4 pip / pbp display modes, in each mode background and pip settings can be customized. （ 0，0） pip_hori_start pip_hori_widt pip_vert_start pip_vert_height background image lvp605 out format = 1920×1080 1920 10 8 0 pip imag...
Page 25
Www.Videowall.Cn 25 lvp605 series user manual item no. Item name 1 main_hori_width 2 main_hori_start 3 main_vert_height 4 main_vert_start 5 pip_hori_width 6 pip_hori_start 7 pip_vert_height 8 pip_vert_start pip switching mode: pip signal switching can be seamless or fade-in / fade-out (0.5s / 1s / 1...
Page 26
Www.Videowall.Cn 26 lvp605 series user manual 5-3 mosaic settings the maximum output resolution of lvp605 is 2304×1152 or 2560×816 and it takes 2 sending cards to drive a led screen with such resolution and that’s why lvp605 has 2 sending card slots; if the resolution of led screen is above the maxi...
Page 27
Www.Videowall.Cn 27 lvp605 series user manual #1( 1728 x 960 ) #2( 1728 x 960) #3( 1728 x 960 ) #4( 1728 x 960) the following is the system topology： loop out dvi loop out lvp605#0 #1 #2 #4 #3 input signals lvp605#1 lvp605#3 lvp605#2 lvp605#4 system topology 3456 1920 dvi figure 5-5 system topology ...
Page 28
Www.Videowall.Cn 28 lvp605 series user manual item no. Item name 1 out_hori_width 2 out_hori_start 3 out_vert_height 4 out_vert_start 5 in_hori_width 6 in_hori_start 7 in_vert_height 8 in_vert_start 9 mosaic mode remark: to make sure of uniformity of output images when running “mosaic”, settings lik...
Page 29
Www.Videowall.Cn 29 lvp605 series user manual no.1~4: “output image parameters” these 4 parameters correspond to no.4~7 in user settings. 1080 1920 ( 0,0 ) （ 960,0） ( 0,540 ) ( 960,540 ) 1# lvp605 2# lvp605 3# lvp605 4# lvp605 input 1728 960 led display figure 5-6 output image parameters no.5: “in_h...
Page 30
Www.Videowall.Cn 30 lvp605 series user manual no.6: “in_hori_start” as shown in picture 5, the input starting point of each lvp605 should be set as: 1# lvp605 in_hori_start = 0 2# lvp605 in_hori_start = 960 3# lvp605 in_hori_start = 0 4# lvp605 in_hori_start = 960 no.7: “in_vert_height” as shown in ...
Page 31: Chapter 6 Specifications
Www.Videowall.Cn 31 lvp605 series user manual chapter 6 specifications inputs number / type 3×video 1×s-video 1×ypbpr 2×vga（rgbhv） 1×hdmi（vesa / cea-861） 1×dvi（vesa） 1×ext. (extended) video system pal / ntsc composite video amplitude / impedance 1v (p_p) / 75Ω s-video amplitude / impedance y: 1.0v (...
Page 32
Www.Videowall.Cn 32 lvp605 series user manual vga / dvi format 1024×768_60hz / 75hz 1280×1024_60hz / 75hz 1600×1200_60hz 1920×1080p_50hz / 60hz 1366×768_60hz 1440×900_60hz 2048×1152_60hz 2560×816_60hz 2304×1152_60hz 1920×1200_60 hz 1200×1600_60 hz 1080×1920_60 hz 1536×1536_60 hz customizable output ...
Page 33
Www.Videowall.Cn 33 lvp605 series user manual product dimension: figure 6-1 product dimension figure 6-2.
Page 34
Www.Videowall.Cn 34 lvp605 series user manual chapter 7 viewrgb lvp605 series control software lvp605 control software is used to control lvp605 by software. With this software, we can realize: seamless switching or fade-in / fade-out of input signals. 4 customizable pip / pbp display modes and text...
Page 35
Www.Videowall.Cn 35 lvp605 series user manual as the above picture shows, user interface consists of 8 areas: a) rs232 com port configuration b) ip port configuration c) input signal select d) switching effect select e) information bar f) timer settings g) function select h) pip mode select i) langu...
Page 36
Www.Videowall.Cn 36 lvp605 series user manual first select a com port accordingly and then select the correct device id. Com number can be checked in “device manager” of control pc as follows: device id (the same as no.21 “device id” in user settings) selected should be the same as that of lvp605 to...
Page 37
Www.Videowall.Cn 37 lvp605 series user manual in this area, buttons and indicators correspond to those on the front panel of lvp605. When devices are connected successfully, the software will read the current selected input signal of lvp605 and indicates it in a blue spot. If the blue spot is on all...
Page 38
Www.Videowall.Cn 38 lvp605 series user manual pip / pbp and pip mode will flicker, select another signal as pip source. If the indicator of the pip signal is on all the time, pip display mode will work properly. Pip or pbp display modes can be selected by pressing buttons m1, m2, m3 or m4. When pip ...
Page 39
Www.Videowall.Cn 39 lvp605 series user manual timer of the control software can be used for timing switch of input signals of lvp605. Timer offers timing plans including “day”, “week”, “month” and “once”. Select one or several timing plans, click “start” and timer starts to work. If need to stop the...
Page 40
Www.Videowall.Cn 40 lvp605 series user manual as the above picture shows, the button “refresh” is used to update any changed settings. The information bar will display any improper settings. The current output resolution of lvp605 is displayed in the interface, but it can’t be changed by the softwar...
Page 41
Www.Videowall.Cn 41 lvp605 series user manual output parameters should be set according to the resolution of led screen. Mosaic mode and input parameters are only used for multiple unit mode. Options are provided to set whether the processor adopts synchronous or non-synchronous mosaic mode. Input p...
Page 42
Www.Videowall.Cn 42 lvp605 series user manual 3) text it is used to set the red, green and blue threshold values of valid information of the text signal to be captured by the processor, also to set whether the text is higher or less than threshold values, select appropriate threshold values, click “...
Page 43
Www.Videowall.Cn 43 lvp605 series user manual 6) hot spare this option is used to turn on/off the hot spare function of the following four groups of input signals. 7) timer settings click in the user interface, timer setting will appear as follows:.
Page 44
Www.Videowall.Cn 44 lvp605 series user manual as shown in the above picture, there are two types of plans: cycle plan once plan cycle plan includes: day plan week plan month plan users can select a plan desired. Day plan items define hour, minute and second; week plan items define day, hour, minute ...
Page 45
Www.Videowall.Cn 45 lvp605 series user manual plan. Select the plan already added, and then you can modify or delete it. 3. Fast mosaic multiple units of lvp605 connected in parallel can be used to drive ultra large led screens. Users can complete input/output parameter configuration of lvp605 throu...
Page 46
Www.Videowall.Cn 46 lvp605 series user manual remark: following conditions must be met for mosaic settings: 1. Settings of brightness, saturation, grayscale and sharpness of each lvp605 should be the same. 2. The output resolution of each lvp605 should be the same; the output resolution should be th...
Page 47
Www.Videowall.Cn 47 lvp605 series user manual 1) use software to connect lvp605 select the device id (same as item no. 21 “device id” in user settings) of the first unit, click “connect”, it will be automatically connected, the software will then read and display its current parameters (e.G.: output...
Page 48
Www.Videowall.Cn 48 lvp605 series user manual caution: both input and output parameters of lvp605 must be even, but the results of auto calculation may be odd, if so, it is necessary to set an adjusted value to correct the parameters to be even, and then you can click “set” to save it. 5) parameter ...
Page 49
Www.Videowall.Cn 49 lvp605 series user manual chapter 8 notes about models lvp605d: with a vga/dvi/hdmi extended input port lvp605s: with a sdi/hd-sdi extended input port lvp605: with a video extended input port.
Page 50: Chapter 9 Copyright Info
Www.Videowall.Cn 50 lvp605 series user manual chapter 9 copyright info the copyright of this manual is owned by shenzhen vdwall co., ltd., unless with prior consent of vdwall, nobody is permitted to copy or use any part of the information contained herein. This manual is provided for reference only,...