Vea T100 User Manual - page 12
9
9
Basic Operations
Once program search is completed, you can start to watch digital
terrestrial TV channels and radio broadcasts. Some typical
operations are given in this chapter.
Switching On and Off
Whenever you are not using the receiver, press the Standby key on
remote control orbutton on the receiver to put it into standby mode.
Changing Channels
To switch between different channels, you can:
Press OK to display the channel list and UP/DOWN to select
a desired channel.
Press the CH+ / CH- key or buttons on the receiver to go to the
previous/next channel.
Use the numeric keys to select a channel number.
Use the RECALL key to return to the previous viewed channel.
Whenever you change a channel, a banner appears at the bottom
of the screen displaying the basic information on the current
channel.
Adjusting the Volume
Press the VOL+ / VOL- key to adjust the volume.
1
2
3
4
5
7
8
Program Name
DIMO
FTV
FMTV
FTVN
TTV-1
HAKKA
CTS
No.
TTV-2
6
TV Program List
TV
13
HAKKA
LR
TV/Radio
Channel No.
Channel Name
Sound Mode
Volume