Vector CANcaseXL Manual - page 14
CANcaseXL and CANcaseXL log
Manual
- 12 -
Version 5.1
© Vector Informatik GmbH
Status
Data
Meaning
(( orange ))
*
Warning
: The SD card contains less than 10% of free
space. The logging is not stopped.
*
(( orange ))
Warning
: Critical data rate, but no messages are lost.
The logging is not stopped. The LED state will change
when the critical data rate decreases.
*
(( red ))
Error
: Too high data rate, messages are lost. The logging
is not stopped but the LED state will not change till the
device is rebooted.
* : Alternating state of the LED, depending on data transmission.
(( )) : Blinking or flashing LED.
2.6.3 Piezo Buzzer
Trigger event signals
The CANcaseXL log has a piezo buzzer that acoustically alerts the user to internal
trigger events. Triggers may be defined using the
XL log Config
configuration tool
(driver CD: \Tools\CANcaseXL_log).
2.6.4 Memory Card
Inserting and
removing the
SD card
The CANcaseXL log has a push-and-pull card holder in which the SD card is inserted
and removed. To insert a SD card push it until it latches in place securely. To remove
the SD card push it into the holder slot a little bit until it unlatches then let it go and it
will spring out of its latched position.
Warning:
Do not pull the SD card from the card holder forcefully, since this could
cause mechanical damage!
Formatting the
SD card
Before the SD card can be used it has to be formatted with the configuration tool
XL log Config
(driver CD:\Tools\CANcaseXL_log).
Memory
requirements
A single CAN message needs up to 20 byte, a single LIN message needs up to 108
bytes on the memory card.
CardFix Kit
The standard delivery of the CANcaseXL log allows the user to insert and remove the
SD card from outside. In some situations, e.g. to prevent thefts, the inserted SD card
shall not be removable. The
CardFix Kit
is a good protection because the back side
plate with the SD card slot is replaced by a closed plate. Thus the SD card cannot be
removed so easily anymore. The
CardFix Kit
can be ordered at Vector (article number
07132).
Warning:
The CANcaseXL log must be opened for this modification! A detailed
instruction is delivered with the kit. However, the modification of your CANcaseXL log
can be done by our service.