Vector MAXX SST 1000 VEC049 Owner's manual - page 2
IMPORTANT SAFETY INFORMATION
To ensure reliable service, your power inverter must be installed and used
properly. Please read the installation and operating instructions thoroughly
prior to installation and use. Pay particular attention to the WARNING and
CAUTION statements in this manual. The CAUTION statements advise
against certain conditions and practices that may result in damage to your
inverter. The WARNING statements identify conditions or practices that
may result in personal injury.
READ ALL INSTRUCTIONS BEFORE USING THIS POWER INVERTER
WARNINGS
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, EXPLOSION OR INJURY:
•
Do not connect to AC distribution wiring
•
Remove appliance plug from outlet strip or turn off inverter before
working on the appliance
•
DO NOT locate inverters in an area, room or compartment where
explosive or flammable fumes might be present
•
When using multiple outlet power strips with switches and circuit
breakers ,they only interrupt power to the “hot” receptacle terminals.
The “neutral” terminals remain powered with respect to the “ground”
terminals
•
Unplug appliances when servicing
•
This is not a toy - keep away from children
CAUTIONS
•
NO USER-SERVICEABLE COMPONENTS INSIDE OPENING UNIT
WILL VOID WARRANTY
•
Do not use with positive ground electrical systems (the majority of
modern automobiles, RVs, trucks and boats are negative ground)
Reverse polarity connection will result in a blown fuse may cause
permanent damage to the inverter and will void the warranty
•
This inverter will not operate appliances or equipment that exceed
inverters maximum rating
•
Grounding the Neutral will cause the inverter to shut down
•
Do not operate this inverter if it is wet
•
Do not install in engine compartment - install in a well ventilated area
•
Not approved for use in conjunction with medical equipment
IMPORTANT CABLE INFORMATION
Substantial power loss and reduced battery operating time results from
inverters installed with cables that are not able to supply full power.
Symptoms of low battery power can result from cables that are either
excessively long or an insufficient gauge. The installer/operator should
be especially aware of the requirements to maintain secure, electrical
connections. Cable insulation and ampacity must be the appropriate type for
the environment. If you want to purchase a prepared cable and fuse set
contact Technical Support at (954) 584-4446 or toll-free at
(866) 584-5504, extention 119.