Veho MUVI Atom User Manual - page 6
6
Veho MUVI ATOM Operation
7. While powered on the MUVI ATOM is capable of taking snapshot pictures. Simply press the
snapshot button, the green LED indicator will flash once and a photo will be saved to the SD
card. A snapshot can be taken during video capture, simply press the snapshot button, video
will be saved to the SD card followed by a snapshot image.
8. You can check the remaining memory available for video/snapshots by pressing the snapshot
button for 4 seconds. The green LED indicator will flash between 1 and 4 times for an
indication of memory consumption. See Table on page 9 — 10.
9. You can check the remaining battery available for video/snapshots by pressing the record
button for 4 seconds. The red LED indicator will flash between 1 and 4 times for an
indication of battery remaining. See Table on page 9—10.
10. To use sound activation mode move sound activation switch on right hand side of the MUVI
ATOM to on and power switch on left hand side to on. When MUVI ATOM recognizes sound of
more than 65 decibels it starts recording. If MUVI ATOM recognizes no further sound greater
than 65 decibel for 2 minutes it will save MUVI ATOM files and enter standby mode. When in
standby if sound of greater than 65 decibels is recognized again the MUVI ATOM will enter re-
cording mode again.
E
n
g
lis
h