Veho muvi K-series User Manual - page 7
12
13
Format the microSD card in the camcorder. Note: Formatting will
delete all files, including protected ones.
Restore the camcorder to the factory setting default.
Ver:C.E4.10
Shows the version of Muvi K-Series firmware you have
Setting the date/time
Select the date/time option from the setting menu then select the format that you
would like the date to appear as between:
Y-M-D H:M M-D-Y H:M D-M-Y H:M
After selecting the format the camcorder will enter the date and time setup. Use
the camera and stop record buttons to change the highlighted position. After you
have selected the correct number press the start record button to move to the next
position.
Once you have changed the minute setup press the start record button to return to
the format setup, then press the camera button to exit the date and time setup.
To switch between modes press and hold the start
record button for three seconds.
Press the stop record button repeatedly to navigate through the options. Press the
start record button to select your preferred option. For further information on each
option please see below.
Symbol
Mode
Further Information
Video
Page 15
Silent
Page 15
Audio
Page 15
Time Lapse
Page 15
Auto Video
Page 15
Piv
Page 16
Single Shot
Page 18
8. Switching between modes