Velleman CAMCOLBUL11 User Manual - page 4
CAMCOLBUL11
VELLEMAN
- 4 -
•
STEP 3
Fix the camera onto the bracket. Adjust the angle and fasten. Adjust the
sun shield. Pass the video/power cable through the hole and proceed
with the electric connection.
•
STEP 4
Connect the video/power cable (A) of the camera to the video/power cable (B) of the adapter. Connect the
camera power lines (C) to a power cable (D, not incl.) (white = +, black = -). Twist the braids together, solder
and cover with insulation tape or heat-shrinking tubes.
•
STEP 5
Connect the video cable to a monitor video input with a 75Ω coaxial cable.
4. Technical Specifications
Pick-Up Element
1/3” colour CCD image sensor
Pixels
500 (H) x 582 (V)
Resolution
350 TV lines
Min. Illumination
0.25 lux/F1.4
IR LEDs
24
Effective Range
± 20m
S/N Ratio
> 48dB
Electronic Shutter
1/60 (1/50) to 1/100000s
Lens
f6.0/F1.4
Lens Angle
56°
D&N Filter Control
built-in IR filter
Line Lock
yes
Iris Mode
AES
White Balance
ATW
Video Output
1.0Vp-p composite, 75Ω
Microphone
no
IP Rating
IP67
Power Supply
100~240VAC +/- 10%
Power Consumption
max. 5W
Dimensions
112 x 82 x 75mm
Total Weight
775g
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of
damage or injury resulted from (incorrect) use of this device.
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.