Velleman CAMCOLD3 Manual - page 5
CAMCOLD3
- 5 -
VELLEMAN
Example: Controlling the P/T of camera n° 2.
o
Press 2 and the CAM key to select camera n° 2.
o
Tilt the joystick to control the camera P/T or use the Z-, Z+, F- or F+ key to control the lens.
c.
Setting Up the Preset
•
Select a camera and set the P/T and the lens to the desired position.
•
Press the F1 key and press 8.
•
Define the preset number (1 – 64).
•
Press PRE to confirm.
Example: Setting preset 15 to camera n° 5.
o
Press 5 and then press the CAM key to select the camera.
o
Move the P/T and the lens to the desired position.
o
Press the F1 key.
o
Press 8.
o
Press 15.
o
Press PRE to confirm your selection.
d.
Running the Preset
•
Select the desired camera number.
•
Define the preset (1 - 64). The default preset is 1.
•
Press the CALL key. The corresponding preset will be displayed on the screen.
Example: Setting camera n° 3 to preset 6.
o
Press 3.
o
Press the CAM key.
o
Press 6.
o
Press the CALL key.
o
Preset 6 of camera n° will be displayed.
e.
Pausing a Running Preset
•
Select the desired camera ID (1 – 63).
•
Press the HOLD key or tilt the joystick. The auto running preset will be paused.
Example: Pausing the preset of camera n° 4.
o
Press 4.
o
Press the CAM key.
o
Press HOLD or tilt the joystick. The preset of camera 4 will be paused.
f.
Setting the Auto Scan
•
Make the camera turn to the left using the joystick until the desired position has been reached.
•
Press 92 and press the CALL key to set the left limit auto scan.
•
Make the camera turn to the right using the joystick until the desired position has been reached.
•
Press 93 and press the CALL key to set the right limit auto scan.
•
Press the PAN key to make the camera scan from the left to the right. When the camera reaches the appointed
position, it will pause for 2 seconds and then move repeatedly from the left to the right. To stop the auto scan, just
tilt the joystick.