Summary of CS100
Page 1
Cs100 discriminator metal detector owner's manual.
Page 2: Features
Cs100 gb 1 features ==================================================== with your discriminator metal detector, you can hunt for coins, relics, jewellery, gold and silver just about anywhere. The discriminator metal detector is versatile and easy to use. The detector's features include : earphone j...
Page 3: Preparation
Cs100 gb 2 preparation ==================================================== assembling the detector assembling your detector is easy and requires no special tools. Just follow these steps. 1. Turn the stem's lock nut clockwise until it loosens. 2. Lengthen or shorten the stem so when you stand uprig...
Page 4: Adjusting The Search Coil
Cs100 gb 3 knobs adjusting the search coil loosen the knobs at the search coil's end, then adjust the search coil to the desired angle. (the search coil should be parallel with the ground). Tighten the knobs just enough to keep the search coil from rotating or wobbling. Installing the batteries you ...
Page 5
Cs100 gb 4 2. Press on the battery compartment cover and slide the cover off in the direction of the arrow. 3. Insert the batteries into the compartment as indicated by the polarity symbols (+ and -) marked inside the compartment. 4. Replace the cover. Caution : • always remove old or weak batteries...
Page 6: Testing The Batteries
Cs100 gb 5 testing the batteries if the detector does not turn on, has weak volume, will not tune properly, has erratic operation or drifts, test the battery power. Rotate volume away from off and set operate/batt test to batt test. If the pointer on the vu-meter is between 3 and 6 (green area), the...
Page 7
Cs100 gb 6 listening safely to protect your hearing, follow these guidelines when you use earphones. • set the volume to the lowest setting before you begin listening. After you begin listening, adjust the volume to a comfortable level. • do not listen at extremely high volume levels. Extended high-...
Page 8
Cs100 gb 7 right wrong search coil sweeping hints : • never sweep the search coil as if it were a pendulum. Raising the search coil while sweeping or at the end of a sweep causes false readings. • sweep slowly - hurrying makes you miss targets. If the detector detects the material, it sounds a tone ...
Page 9: Fine-Tuning The Detector
Cs100 gb 8 fine-tuning the detector when you become familiar with how your detector works, you can fine-tune it to make it more selective in what it finds. Discrimination is the detector's ability to differentiate between types of metal. The detector's discrimination settings determines whether the ...
Page 10: Detection Hints
Cs100 gb 9 detection hints no detector is 100 percent accurate. Various conditions influence metal detection. The detector's reaction depends on a number of things : • the angle at which the object rests in the ground. • the depth of the object. • the amount of iron in the object. • the size of the ...
Page 11
Cs100 gb 10 red button tuning the detector tune fine-tunes the balance between the detector's receiver and transmitter circuitry to provide consistent pointer and tone indications. Follow these steps to set tune. 1. Rotate volume to the 11 o'clock position. 2. Set discrimination to its midpoint. 3. ...
Page 12
Cs100 gb 11 testing and using the detector to learn how the detector reacts to different metals, you should test it before you use it the first time. You can test the detector indoors or outdoors. Indoor testing important : if the device emits a signal for nonferrous metals and none for ferrous meta...
Page 13: Pinpointing A Target
Cs100 gb 12 if the detector detects the material, it sounds a tone and the pointer moves to the left (ferrous) or to the right (non-ferrous) while the detector determines the type of metal it is detecting. If the detector does not detect the material, check the battery power and verify that the sear...
Page 14
Cs100 gb 13 4. Repeat steps 1-3 at a right-angle to the original searchline, making an "x" pattern. The target will be directly below the "x" at the point of the loudest response. Notes : • if trash in an area is so heavy that you get false signals, slow your sweep and use shorter sweeps. • recently...
Page 15: Trouble Shooting
Cs100 gb 14 trouble shooting ==================================================== if your detector is not working as it should, follow these suggestions to see if you can eliminate the problem. Problem suggestion the detector displays or sounds false signals you might be sweeping the detector's sear...
Page 16: Care And Maintenance
Cs100 gb 15 care and maintenance ==================================================== keep the metal detector dry. If it gets wet, wipe it dry immediately. Liquids might contain minerals that corrode the electronic circuits. Handle the detector gently and carefully. Dropping it can damage circuit bo...