Velleman CS100 Owner's Manual - Care And Maintenance
CS100 GB
15
CARE AND MAINTENANCE
====================================================
Keep the metal detector dry. If it gets wet, wipe it dry
immediately. Liquids might contain minerals that corrode
the electronic circuits.
Handle the detector gently and carefully. Dropping it can
damage circuit boards and cases and can cause the
detector to not work properly.
Use and store the detector only in normal temperature
environments.
Temperature extremes can shorten the life of electronic
devices, damage batteries, and distort or melt plastic
parts.
Keep the detector away from dust and dirt, which can
cause premature wear of parts.
Wipe the detector with a damp cloth occasionally to
keep it looking new. Do not use harsh chemicals,
cleaning solvents or strong detergents to clean the
detector.
Modifying or tampering with the detector's internal parts can cause a
malfunction and might invalidate its warranty.
The search coil supplied with the detector is waterproof and can be submerged
in either fresh or salt water. However, do not let water enter the detector's
control housing. After using the search coil in salt water, rinse it with fresh
water to prevent corrosion of the metal parts.