Velleman MONCOLHA5PN3 Manual - page 2
MONCOLHA5PN3
- 2 -
VELLEMAN
5. Beware
•
During installation, verify if you are not damaging any electric wires, fuel, brake or exhaust systems, other hoses
or any other item that can affect the operation of the vehicle.
•
To avoid electrical hazards, do not open the housing of the monitor.
•
Use only the supplied DIN cable to establish connections.
•
To disconnect: power down the unit, disconnect the cable at the video source side first and then disconnect it
from the monitor.
•
Do not use chemical agents to clean your MONCOLHA5PN3. Remove dust and stains with a damp cloth only.
6. Technical Specifications
Screen Size
5.6 inch
System PAL
&
NTSC
Power source
12Vdc +/-10%
Power consumption
<700mA
Video input
Composite video signal
Operating temperature
0 ~ 60°C
Storage temperature
-20 ~ 80°C
Display method
TFT Active Matrix System
Resolution (HxV)
960x234 dots
Backlight
Cold cathode tube
7. Wiring
Power: black connector
V1 in: video input 1 ; yellow connector.
Audio in: red connector.
V2 in: video input 2: white connector.
The information in this manual is subject to change without prior notice.