Velleman moncolha7pn5 User Manual - page 4
MONCOLHA7PN5_v2
VELLEMAN
4
5. Use
• Power-On/Off
o
Press the power button (1 or 6) to switch the monitor on. To switch off, hold for 2 seconds.
• Input Source Selection
o
Press repeatedly the switch button (9) on the remote control to switch from AUX1 → AUX2 → CAMERA.
• Menu
o
Press the menu button (5) to display the OSD and continue pressing the menu button or the down (8) or up (10)
button to select a function. Modify the setting as desired with the setting adjustment buttons (7 and 11).
o
When using the remote control, press the menu button on the remote control (12) to display the OSD and press the
down (8) or up (10) button to select a function. Modify the setting as desired with the setting adjustment buttons (7
and 11).
BRIGHT brightness
1~100
CONT contrast
1~100
COLOR colour
1~100
TINT hue
1~100
ZOOM
display mode
4:3 or 16:9
REVERS
rotate image
REV1: upside down, REV2: upside down + mirrored, REV3: mirrored, REV4:
normal
POWER
auto power function
AUTO / NORMAL
CAMERA
mirror function
♣
MIRROR / NORMAL
♣
only
on camera input
• Volume
o
Adjust the volume with the volume adjustment buttons (7 and 11).
6. Technical Specifications
Display
7” TFT Active Matrix (16:9/4:3)
Resolution
1440 (H) x 234 (V)
Pixels 336
960
Luminance 400
cd/m²
Video Input Signal
1.0Vpp / 75Ω (composite video signal)
OSD Function
horizontal/vertical image reversing, setting adjustment and volume
Power Supply
Monitor max.
10-32VDC
Remote Control
1 x 1.5V CR2025 battery (incl.)
Dimensions
171 x 125 x 19mm
Weight 400g
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or
injury resulted from (incorrect) use of this device.
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.